User manual

169 Version 1.0
4. SSID
Name your wireless network, and the default is previously selected wireless AP.
5. bg Mode
This field indicates the 802.11g interface mode. 802.11g prevents the 802.11b clients
from accessing the router; 802.11b provides 802.11b standard wireless network. By
default, the value is bg Mixed, which allows both 802.11b and 802.11g clients to
access the router.
6. Rate
Select the transmission rate up to 54Mbps for the network. The default setting is Auto.
7. Channel
MT4205 supports up to 14 overlapping channels for radio communication (For the US
and most of Europe, channel 1, 6 & 11 are used.) By default, the channel is Auto.
8. Obtain IP Automatically
Check to allow system automatically obtaining IP.
9. Specify an IP
Put in the required information as specified upon your demand.
10. Encryption
Include 4 options of Open System, Shared Key, TKIP and AES.
Open System & Shared Key
WEP Encryption
MT4205 supports both 64-bit and 128-bit encryption using the Wired Equivalent
Privacy (WEP) algorithm. Select the type of encryption you want to use (64 or 128 bit)
and configure one to four WEP Keys. The ―1280bit‖ method is more secure than the
―64-bit‖.
Key Type: For 64bits WEP key, either 5 ASCII characters or 10 hexadecimal digitals
leading by 0x can be entered. For 128bits WEP key, either 13 ASCII characters or 26
hexadecimal digits leading by 0x can be entered.
Note: 128 bits WEP is most secure, but has more encryption/decryption overhead. Note that all wireless
devices must support the same WEP encryption bit size and have the same key. Four keys can be
entered here, but only one key can be selected at a time. The keys can be entered in ASCII or
Hexadecimal. Select the item from drop-down list you wish to use.