User manual

167 Version 1.0
To apply your new settings, please click on Finish button to reboot system automatically
and go to the product’s diagram homepage. You may connect to Internet wirelessly at this
moment according to above settings.
5.3 IP Configuration
This function allows you to add routing rules into MT4205, including LAN and Site Survey.
5.3.1 LAN
Use this page to set up the local IP address and subnet mask for your router. Please select
LAN under the IP Config menu and follow the instructions below to enter the LAN setting
page to configure the settings you want.
1. IP Address
The default value of LAN IP address is 10.64.64.64 for this router.
2. IP Netmask
Fill in Subnet Mask, normally it is 255.255.255.0.
3. Start IP
This field specifies the first address in the pool to be assigned by the DHCP server in
your local network. The default setting is 65.
4. End IP