User manual

144 Version 1.0
1. Update Firmware: Click Browse to search your local hard drive and locate the firmware
used for update.
2. OK & Cancel
Click OK to confirm or Cancel to clear the setting on this page.
Notice: Before using a whole new disk, please format it on your PC first, so that it can be formatted on MT4205.
4.5.4 Profile Save
To back up the current configuration setting or load the backup data, also you can restore
MT4205 to default setting by this function.
1. Save Settings To PC: Click on Save button for saving the configuration setting into
assigned location.
2. Load Settings From PC: Click on ―Browse…‖ button for searching the saving
configuration from hard drive, and then click on Load button to load all the settings
into the router.
3. Restore To Factory Default Settings: After you have tried other methods for
troubleshooting your network, you may choose to restore MT4205 to the factory
default settings.
4. Apply
Click on Apply button to save the settings.