User manual

118 Version 1.0
1. IP Address
The default value of LAN IP address is 192.168.1.254 for this router.
2. IP Netmask
Fill in Subnet Mask, normally it is 255.255.255.0.
3. IP Gateway
Fill in with the default gateway address. If you don’t know, please check your ISP.
4. DHCP
Enable or disable DHCP services. DHCP server will automatically allocate an unused IP
address from the IP address pool to the requesting computer if enabled.
5. Start IP
This field specifies the first address in the pool to be assigned by DHCP server in your
local network. The default setting is 2.
6. End IP
This field specifies the last address in the pool to be assigned by the DHCP server in
your local network. The default setting is 253.
7. Advanced
Enable the advance setting and then set up the Router, DNS and WINS value.