User manual

117 Version 1.0
Click on Next button to next setup.
4.2.11 Quick Setup Finish
The Quick Setup has been completed successfully when you see this screen.
To apply your new settings, please click on Finish button to reboot system automatically
and go to the product’s diagram homepage. You may connect to Internet via wired or
wireless at this moment according to above settings.
4.3 IP Configuration
This function allows you to add routing rules into MT4205. It doesn’t provide functions of
WAN and DDNS in AP mode, though.
4.3.1 LAN
Use this page to set up the local IP address and subnet mask for your router. Please select
LAN under IP Config directory and follow the instructions below to enter the LAN setting
page to configure the settings you want.