User manual

110 Version 1.0
 LAN Setup: Setup the IP Address for LAN and Group. If you are using the Router
with multiple PCs on your LAN, you must connect the LAN via the Ethernet ports on
the built-in Ethernet switch. You should also assign a unique IP address to each
device residing on your LAN.
 Wireless Setup: Define the Wireless Mode, ESSID, TxRate, Channel and other
wireless settings.
 Time Server Setup: Set time by NTP server or user define.
 Password Setup: To change administrator’s password.
 USB Disk Management Setup: View the entire data folder inside each storage
devices, also can do formatting and disk partition.
 User Account Management Setup: Set maximum user number, account and right for
using personal services of your MT4205 for each user.
 FTP Server Setup: To enable FTP server and set controlling rules.
 Printer Server Setup: To enable /disable server.
 Web Camera Setup: To enable Web camera function.
 Samba Server Setup: To enable Samba server for shared documents and printer.
4.2.1 LAN Setup
If you are using MT4205 with multiple PCs on your LAN, you must connect the LAN via
the Ethernet ports on the built-in Ethernet switch. You must assign a unique IP address to
each device residing on your LAN. The LAN IP address identifies the router as a node on
your network; that is, its IP address must be in the same subnet as the PCs on your LAN.
The default LAN IP for the Internet Security Router is 192.168.1.254.
For Gateway IP Address, the IP address 192.168.1.xxx (xxx can be any number between
The default IP address