Operation Manual

MyNote Bluetooth Manual EN
www.aiptek.eu Page 8
Using Note Manager (Windows only)
1. Uploading your Mobile Notes (USB)
Open the Note Manager software by clicking on
the desktop icon.
Now simply connect your base unit to your USB port. Select
‘Note Mode’ as the application mode and confirm ‘OK’.
The Note Manager application will detect your un it and will
prompt you to upload your notes. Select “Yes” to start
transferring your notes. Or, simply click the "upload"
icon.
2. Uploading your Mobile Notes (Bluetooth)
Start the Bluetooth Environment byclickingtheicononyour
desktop. Make sure the Bluetooth of your PC and MyNote
Bluetooth is turned on. Click on “Add Bluetooth device” and simply
follow the assistant. After searching the assistant should find
“mobile pen”or“MyNote Bluetooth”. Select this device and
use 0000 as passphrase.
If assistant ask you to select a Bluetooth Service Selection
please activate SPP DEV and finish the assistant.
To pair both devices please click the mobile pen SSP Dev
icon which is in your Bluetooth device list now.
Open the Note Manager software by clicking on
the desktop icon. The Note Manager application will detect your unit and will prompt you to upload
your notes. Select “Yes” to start transferring notes.