Operation Manual

Enjoying digital TV/radio program

Button tip

<4-Way> up/down : Switch channel

<4-Way> left/right : Adjust sound volume

<OK> : Channel quick list; conrm menu action

<Information> : Bring up TV info menu (subtitle, language, EPG..etc.)

<Exit> : Previous channel; cancel menu action

In the function selection menu, select the digital TV item and you will enter digital TV/

radio mode.

If this is the rst time you use the TV function or you just travel to a different country,

please follow these steps to scan/renew the digital TV channels:

1) Press the Menu button to return to the function selection menu and select the

settings item.

2) In the subsequent menu, select the <Conguration System Setup Area> item to

set your location.

3) Go back to system settings main menu and select the <Channel Search Area

Search> item.

4) The search begins. Please wait for the search to complete.

5) Channels will be saved after the scan is nished. Then you can switch to the digital

TV mode and watch digital TV.

Note: You are recommended to perform the scan in an open area with good reception.

Make sure the antenna is well-installed or use the extended antenna if necessary.

While watching digital TV, you can:

1) Use the 4-Way button up/down to switch channel; left/right to adjust volume.

2) Use the Mute button to disable/enable sound.

3) Press the Information button to choose subtitle*, multi-audio*, TTX*,

EPG(Electronic Program Guide), or program info.

* Availability depends on content provider.

4) Press the Menu button to return to the function selection interface.

Digital Radio

While scanning channels, digital radio programs are also added into the channel

table if they are available. Digital radio programs are similar to digital TV programs

except they carry only audio contents.

To listen to digital radio, press the TV/Radio button while watching digital TV. Press

the same button again to switch back to digital TV screen.