Operation Manual

4
EN
Installing the antenna
Connect the antenna to the antenna
connector. Then stretch and adjust the
antenna to gain best reception.
If you need to place the antenna in
a higher location or close to window
to get better reception, you can use
the extended antenna. The extended
antenna comes with a magnetic base,
thus enabling it to adhere to metal
surface for better signal.
Powering on/off
Press the power button for 1 second to turn
power on. When AC power is connected, the
LED indicator will light up.
To turn power off, press the power button for
1 second.
Using your memory card
To insert a memory card, gently push the card
until the card reaches the end of the slot. To
remove the memory card, gently push the
card and it will pop up. Then pull the card out
of the slot.
Note:
1) This product can support SD/SDHC/MMC cards of up to 32GB capacity.
2) Make sure the memory card is not corrupt or damaged before using it.
LED indicator
Power button
SD/SDHC/MMC
Extended antenna