User Guide

7
To link the Called Stations groups to the call buttons on the door station, expand Call Settings and click on Call Origination. Use the
Call Button / Option Input # drop-down and select Option Input 1.
Use the Standard Mode Settings - Call Destination drop-down to assign a call group to the Option Input. Press
Update
when a
call group has been set, then switch to the next Option Input and repeat until all of the Option Inputs that will be used have a call group
linked to them.
Programming Call Buttons
Once all settings are congured, select File (F) from the top bar and select Upload Settings to Station. Click
Select
to check all of
the stations, then click on
Settings
. Once
OK
is pressed on the conrmation pop-up, the upload process will start. This process will
take around 30 seconds to a minute. Once it is complete, conrm that the Status column shows Success for each station.
Setting File Upload
For more details about the features and information above, please contact Technical Support.
Aiphone Corporation | www.aiphone.com | [phone]
09/22