Operation Manual

ManualsBrandsAiphone ManualsAudio2-Gang Audio Door Station for the IS Series

GETTING STARTED USING THE SYSTEM APPENDIX

SETTING AND ADJUSTMENT

OUTLINE OF OPERATIONS

This manual mainly describes the following operations.

Operations you can do within a site (communication, transferring, paging, monitoring, door release, etc.)

•

Operations you can do between sites (communication, transferring, paging, door release, etc.)

•

Telephone operations and other telephone-related operations (North America only)

•

NOTES:

The arrows in the ﬁ gure above show examples of operations.

•

For the available functions and operations in a local system, refer to the “OPERATION MANUAL” for the local system.

•

For operating a PC master station (IS-SOFT), refer to the “OPERATION MANUAL” for the PC master station.

•

You can communicate with the pilot station or page the pilot zone registered in a remote site. You cannot select a desired station or zone in a

•

remote site.

Depending on the system conﬁ guration of a remote site, some operations to the site may be disabled.

•

A call or talk may not be possible when the communication path is fully occupied.

•

Video images at the target video door station may not appear on the monitor when the video path is fully occupied even though a call or talk is

•

possible.

IPIPIP IPIPIP

IPIP

IS-IPC

IS-CCU

IS-RCU

IS-RCU IS-RCU IS-SCU IS-SCU

IS-RCU

IS-IPC

Standard (IP) system Standard (IP) system

Local system

The pilot station or zone that receives a

call, paging, etc. from a remote site.

Communication,

transferring,

paging, door

release, etc.

Communication,

transferring,

paging, door

release, etc.

: Control ofﬁ ce, etc.

Building A

Building B

Building C Building D

Building E

PSTN / private line (North America only)

Internet / WAN

PBX telephone

LAN (IP network)

Site 1

Site 2 Site 32

Site 3

Site 4

Telephone

IP unit

Communication,

transferring, paging,

monitoring, door

release, etc.