Ali Per BELT You've now joined a family of millions who have already put their trust in CAG EVE This user manual will help you maintain your Alpert pool cleaner and en ee ETT you have any questions, please visit our website at www Riper com and idle eT lle Cl fee al Alpert Customer Service: Email: Facebook: @Semiofficial
Palmer { English J CONTENTS Important Safety Precautions woo 3 1 Structure 4 2. Specifications & Working Conditions 5 3. Using Your Riper pool cleaner 6 4. Installation 6 5. Disassembly and cleaning coo g 6. Operation more mn 10 7. LED Indicator soon fleece 13 8. Precautions 9. Packing List ooo 18 10.
Ali Per /A\ Important Safety Precautions Please read this manual carefully and use your Alpert pool cleaner in accordance with the manual instructions. Riper is not liable for any losses or injuries caused by improper use of this device. Please strictly follow the instructions below. 1. Do not operate your Alpert pool cleaner while people or animals are in the pug. Turn the cleaner off while not in use or while performing maintenance. woe .
Riper Please read this user manual carefully before using it.
Ali Per pI EE IIT Te CAUTION: Your Alpert pool cleaner is best used in the water conditions detailed below.
Riper EST ee a. The Riper pool cleaner was designed to clean swimming pools that have flat floors and no slopes up to 120m®. hr ele a. Press the brush into the designated slot at the bottom of the device.
Ali Per b. Fix the filter screen onto the bottom shell of the device. ©. Align the upper shell with the chassis and press down slightly to buckle the parts together.
Riper d. Large swimming pools (50m? or above): Increase the cleaning range by adjusting the range lever on the inside of the machine. Small swimming pools {below 50m2): No adjustment is required.
Ali Per 5. Disassembly and Cleaning a. Press and hold the left and right buckles of the device and lift slightly. b. Lift and set aside the upper shell, then remove the filter to begin cleaning. ©. Empty the debris collected at the shell's bottom and rinse with water to clean the device.
Riper a. Charging Fully charge your Riper pool cleaner before using it to clean your pool. * Switch off the power before charging, otherwise the device cannot be recharged, and a rapid alarm will be activated. » Wipe dry the charging port before charging your device. by. After assembly, press the ON button. After the light is steady on and the “beeping” sound stops, the machine will mere standby mode. Put the machine into the water within 30s, and it will start to work normally after 10s.
Ali Per ©. During its cleaning process, the device will routinely encounter walls or obstacles, turn, and continue cleaning in a new direction. d. When the indicator tums red, the device will end its cleaning cycle and move to the pool's edge for retrieval.
Riper & When not operating, the device can be fished out of the pool using the provided hook. The unique design of the spring plate allows for rapid drainage of the device when it is taken out of the pool.
