SDS

Guangdong Pow-Tech New Power Co., Ltd.
No.9, Hengdong 3 Road, Hengkeng Shiling Industry Zone, Liaobu Town,Dongguan, Guangdong
Report No.: MSDS-PT001-2024/V0
3 / 7
Flammable
Properties
In the event that this battery has been ruptured, the electrolyte solution contain within the
battery would be flammable. Like any sealed container, battery cells may rupture when
exposed to excessive heat; this could result in the release of flammable or corrosive
materials.
Suitable
extinguishing
Media
Use extinguishing media suitable for the materials that are burning.
Unsuitable
extinguishing
Media
Not available
Explosion
Data
Sensitivity to Mechanical Impact: This may result in rupture in extreme cases
Sensitivity to Static Discharge: Not Applicable
Specific
Hazards
arising from
the chemical
Fires involving Li-ion Battery can be controlled with water. When water is used, however,
hydrogen gas may evolve. In a confined space, hydrogen gas can form an explosive
mixture. In this situation, smothering agents are recommended to extinguish the fire
Protective
Equipment
and
precautions
for firefighters
As for any fire, evacuate the area and fight the fire from a safe distance. Wear a
pressure-demand, self-contained breathing apparatus and full protective gear.
Fight fire from a protected location or a safe distance. Use NIOSH/MSHA approved
full-face self-contained breathing apparatus(SCBA) with full protective gear.
NFPA
Health: 0 Flammability: 0 Instability: 0
Section
Section
6-Accidental
6-Accidental
Release
Release
Measures
Measures
Spilled internal cell materials, such as electrolyte leaked from a battery cell, are carefully dealt with
according to the followings:
Precautions for human body:
Remove spilled materials with protective equipment (protective glasses and protective gloves). Do not
inhale the gas as much as possible. Moreover, avoid touching with as much as possible.
Environmental precautions:
Do not throw out into the environment. Method of cleaning up: The spilled solids are put into a
container. The leaked place is wiped off with dry cloth.
Prevention of secondary hazards:
Avoid re-scattering. Do not bring the collected materials close to fire.
Section
Section
7-Handling
7-Handling
and
and
Storage
Storage
Handling
Don’t handling Li-ion Battery with metalwork. Do not open, dissemble, crush or burn battery.
Ensure good ventilation/ exhaustion at the workplace.
Prevent formation of dust. Information about protection against explosions and fires: Keep ignition
sources away- Do not smoke.
Storage
If the Li-ion Battery are subject to storage for such a long term as more than 3 months, it is
recommended to recharge the Li-ion Battery periodically.