User Manual

9
The robot
does not
reach all
pool areas
There is algae on the
pool floor and it can’t
be cleaned since it
floats easily after the
machine passes by
The pool shape is not
regular
The pool filter system
and pump are running
Turn off the pool filter
system and pump
Release the cable
The cable is not long
enough in the pool
The power supply unit
is improperly positioned
Place the power supply
unit at a proper position
to reach all pool areas
Before using the cleaner,
please clean the algae on
the floor or walls in case
it floats when the machine
passes by
The ideal pool shapes are
ROUND, OVAL,
RECTANGULAR, KIDNEY-
LIKE. Please place the
robot on the area that
needs specific cleaning
It spends all
its time in the
deep area
without
visiting the
shallow area
The pool shape is not
regular like ROUND/
OVAL/RECTANGULAR
Paste the included
floating blocks on the
shell surface (refer to
4.5 on the manual) to
widen the cleaning
coverage
The robot
does not
climb walls
The robot
does not
work
The filter baskets need
to be cleaned
The power cord is not
plugged well
The robot is damaged
during transportation
Clean and wash the filter
baskets
The PVC rollers are worn
or consumed too much
Replace new rollers
The wall radian is too big
or the wall surface is too
slippy.
It doesn't work for
ceramic tile walls.
Plug the power cord
tightly
Contact the customer
service
The cleaner does not
match the local rated
voltage
Contact the customer
service
Electric Fault
Contact the customer
service
The cleaner gets blocked
Contact the customer
service