User Manual

7
4.3 Calibration for Reference Value of Full Basket Alarm
Note: If the full basket alarm is not precise with an incorrect value,
please calibrate it by hand as below.
a) Put the cleaner into the pool, plug the power, and press "Time" and "
On/Off" buttons at the same time;
b) 1H and 3H indicators stay on and the 5D indicator flashes after four
beeps, then release the buttons;
c) The calibration is completed when 5D indicator stops flashing and
stays on, then unplug the power.
4.4 Filter Cleaning
A. Take out the filter baskets:
① Unscrew and open the cover;
② Take out the filters and remove the filter bags from the frames.
B. Rinse the filter bags and frames with water
C. Slide the two filters into the grooves.
4
5
6
Left
Backward
Right
Press and hold the button, the cleaner
moves left, the indicators 3H, 2H and 1H
flash from right to left in sequence on the
control box; Release the button, the
cleaner stops.
Press and hold the button, the cleaner
moves backward, the indicators 7D, 5D
and 1D flash from right to left in sequence
on the control box; Release the button, the
cleaner stops.
Press and hold the button, the cleaner
moves right, the indicators 1H, 2H and
3H flash from left to right in sequence on
the control box; Release the button, the
cleaner stops.