User Manual

6
4.2 Remote Control
4 Indicator
5
Robot
Indicators
(beside the
water outlet)
Abnormal
Indications
All indicators
flash quickly
Overloading
"5D""7D""2H""3H"
four indicators on
The cleaner is out
of water
"5D""2H" two
indicators on
The drive motor at
the cable side is
overloading
"7D""3H" two
indicators on
The drive motor
opposite the cable
side is overloading
Status Issues
Blue light
stays on
Standby in fast running mode
Green light
stays on
Standby in slow running mode
Green light
flashes
Slow running mode
Blue light
flashes
Fast running mode
Red light
flashes
Error
Yellow light
flashes
Filter baskets are full
No.
1
2
Instruction
ON/OFF
SPEED
3 Forward
Note: The remote control working distance
33ft(10m) means the distance between
the remote and the control box instead
of the distance to the cleaner.
Function description
Press the button and the cleaner
starts to run automatically;
Press the button again, the cleaner stops.
Press the button once, the cleaner runs
in fast mode;
Press the button again, the cleaner runs
in slow mode.
Press and hold the button, the cleaner
moves forward, the indicators 1D, 5D
and 7D flash from left to right in sequence
on the control box; Release the button, the
cleaner stops.