ROBOTIC POOL CLEANER User Manual Orca 2000
Thank you for choosing Aiper robotic pool cleaner. You have joined millions of people to enjoy the convenience of robotic pool cleaning. This user manual helps you to keep your robot performing at its best. Please take a few moments to read through it. If you have any questions, please contact our customer service for assistance or visit www.aiper.com for more information. Aiper Customer Service Customer Service Number: US Toll Free: 1-866-850-0666 Email: service@aiper.
CONTENTS Important Precautions ----------------------------- 1 1. Introduction ------------------------------------- 2 2. Structure ---------------------------------------- 2 3. Specifications ----------------------------------- 3 4. Operations -------------------------------------- 3 Attentions ------------------------------------------ 3 4.1 Control Panel and Indicator Instructions ------ 5 4.2 FiIter Cleaning --------------------------------- 6 4.
Important Precautions 1. Read the manual carefully, and use the cleaner according to the manual. We are not liable for any losses or injuries caused by improper use. 2. To avoid any accidents/damages, it is strongly recommended to fix the power supply unit 11.5ft (3.5m) away from the swimming pool by using the included safety rope. 3. To prevent severe damages to the cleaner, never power on the unit when it is outside of the swimming pool. 4.
15. Do not operate the cleaner when there are people or animals in the pool. 16. Take the cleaner out of the swimming pool after use. If the cleaner is immersed in the water for a long time, there will be micro organisms produced. 17. The cord should be untwisted and wrapped properly after use. 18. Use the original adapter only for the control box kit. 19. Do not operate the cleaner while pool filter is running. 20. Do not allow children to ride on the cleaner or play with it. 1.
3. Specifications 1. Model Orca 2000 2. Rated Input Voltage 100V~240V, 50Hz/60Hz 3. Rated Working Voltage DC 24V 4. Power 200W 5. Optional Working Cycles 1H/2H/3H 6. Timer Schedule 1 Day/5 Days/7 Days 7. Pool Size Up to 60ft (18m) 8. Filter Capacity 88GPM(333LPM) 9. Filter Density 100/200μm/400μm multiple filter bags 10. Moving Speed Low Speed 46~49ft/min (14~15m/min) High Speed 59~62ft/min (18~19m/min) 11. Waterproof Grade IPX8 for the cleaner; IPX5 for the power supply unit 12.
2. When pulling the cleaner out of the water, suspend the cleaner on the water for about 10-15 seconds to empty the water inside. Please hold the top handle only; never pull the cable. 3. The power supply unit has to be placed in a proper position to reach the distal end of the pool, at least 11.5ft (3.5m) away from the pool edge. min 3.5m AUTO STAR T TIM 1D E 5D 1H SPE ED 7D 2H 3H 4. Please use the included safety rope to fix the power supply unit in case it drops into the pool.
4.1 Control Panel and Indicator Instructions 2 3 5 AUTO START TIME 1D 5D 7D 2H 3H 4 1H SPEED 1 No. Sign Instruction Function description 1. Press the button to power on. Power ON/OFF/ Start Working 1 2. Press the button again to start working. 3. Press the button again to power off. 2 AUTO START 1. When the cleaner is power-on, press the button to set up start time: 1D, 5D, 7D indicates that the cleaner will start to work automatically after 1 day, 5 days or 7days; 2.
Status All indicators flash quickly 4 Indicator Abnormal "5D""7D""2H""3H" Indications four indicators on "5D""2H" two indicators on "7D""3H" two indicators on 5 Robot Indicators (beside the water outlet) Blue light stays on Green light stays on Blue light flashes Green light flashes Yellow light flashes Red light flashes Issues Overloading The cleaner is out of water The drive motor at the cable side is overloading The drive motor opposite the cable side is overloading Standby in fast running mode St
4 Left 5 Backward 6 Right Press and hold the button, the cleaner moves left, the indicators 3H, 2H and 1H flash from right to left in sequence on the control box; Release the button, the cleaner stops. Press and hold the button, the cleaner moves backward, the indicators 7D, 5D and 1D flash from right to left in sequence on the control box; Release the button, the cleaner stops.
D. Close the cover and screw the fastener. 4.5 Installation of Foam Floating Blocks Attention: If your robot is performing well, please ignore these instructions. The following illustration is limited to the use of white foam blocks to increase coverage when the cleaning machine cannot completely clean and cover the pool area. Stick the two foams on the internal surface of the top cover (see the picture below). Make sure the two foams are in the middle part of the top cover. 5.
The robot does not reach all pool areas The robot does not climb walls The robot does not work The power supply unit is improperly positioned Place the power supply unit at a proper position to reach all pool areas There is algae on the pool floor and it can’t be cleaned since it floats easily after the machine passes by Before using the cleaner, please clean the algae on the floor or walls in case it floats when the machine passes by The pool shape is not regular The ideal pool shapes are ROUND, OV
6. Packing List Item Orca 2000 Quantity (PC) Name Cleaner with 60ft(18m) Cable 1 Power Supply Unit 1 User Manual 1 Safety Rope 1 Floating Blocks 4 100μm filter bags 2 200μm filter bags 2 400μm filter bags in the cleaner 2 7. Warranty 1.This product is covered by Aiper warranty for 24 months ( only for driving kit and control box kit) from the date of purchase. Consumable parts are beyond warranty including Filter Bags/Filter Baskets/ Rollers/Side Covers. 2.
Aiper Customer Service: US Toll Free: 1-866-850-0666 Email: service@aiper.
