Datasheet

Series AMLDL-Z
Up to 1000mA | LED Driver
www.aimtec.com Tel: [phone] Toll free: + 1 888 9 AIMTEC
(924 6832)
F 051e R8.C 2 of 14 North America only
General Specifications (continued)
Parameters Conditions Typical Maximum Units
Maximum case temperature 100
o
C
Thermal Impedance Free air convection +40
o
C/W
Cooling Free air convection
Humidity 95 % RH
Case material Non-Conductive Black Plastic (UL94-V0 rated)
Weight
2.6 (DIP14)
6.2 (DIP 16)
g
Dimensions (L x W x H)
DIP 14 0.80 x 0.40 x 0.27 inches 20.32 x 10.16 x 6.88 mm
DIP 16 0.92 x 0.55 x 0.40 inches 23.37 x 13.97 x 10.16 mm
MTBF > 500 000hrs (MIL-HDBK-217 F at +25
o
C)
Maximum Soldering Temperature 1.5mm from case for 10sec. 260
o
C
NOTES:
1.Reversed polarity at the input power will damage the driver. The input ground must not be connected to the negative output.
2.Leave the pin VADJ opened if not used , grounding VADJ will shut the driver off, connecting VADJ to +Vin will damage the driver.
3.Maximum output open voltage is equal to input voltage
Pin Out Specifications
DIP 14 DIP 16
Pin Single
1 - V Input - DC Supply
2 Vadj PWM/ON/OFF or not used
7 - V Output LED Cathode connection
8 + V Output LED Anode connection
14 + V Input + DC Supply
Derating
Pin Single
1 - V Input - DC Supply
2 - V Input - DC Supply
3 Vadj PWM/ON/OFF or not used
7 - V Output LED Cathode connection
8 - V Output LED Cathode connection
9 + V Output LED Anode connection
10 + V Output LED Anode connection
15 + V Input + DC Supply
16 + V Input + DC Supply
Free Air Convection
-40
-20
020406080
100
100
80
60
40
20
0
Safe Operating Area
Output Power (%)
85
Ambient Temperature
º C
AMLDL-301000Z
71
AMLDL-3030Z
AMLDL-3035Z
AMLDL-3050Z
AMLDL-3060Z
AMLDL-3070Z