Datasheet

Series AMEPR60-AZ
up to 5A | AC-DC LED driver
www.aimtec.com Tel: [phone] Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.D 1 of 11 North America only
FEATURES:
Models
Single output
Model
Max Output
Power (W) *
Output
Voltage
Range (V)
Output
Current (A)
Input Voltage
(VAC/Hz)
Input Voltage
(VDC)
Efficiency
(%)
AMEPR60-50120AZ 60 36-50 1.2 90-277/47-440 120-390
89
AMEPR60-36170AZ 61.2 24-36 1.7 90-277/47-440 120-390
88
AMEPR60-24250AZ 60 12-24 2.5 90-277/47-440 120-390
87
AMEPR60-12500AZ 60 5-12 5 90-277/47-440 120-390
85
*Exceeding the maximum output power will permanently damage the converter
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Input Specifications
Parameters Conditions Typical Maximum Units
Inrush current <2ms
115VAC 30
A
230VAC 50
Leakage current
115VAC 0.5
mA
230VAC 0.75
AC current
115VAC 0.67
A
230VAC 0.33
Power Factor
115VAC 0.99
230VAC 0.97
External fuse 250V/1.5A
Start up time 250 ms
Surge voltage 2sec 440 V
Output Specifications
Parameters Conditions Typical Maximum Units
Current accuracy ±3 %
Line regulation LL-HL ±1 %
Load regulation 0-100% load ±3 %
Ripple & Noise * 20MHz Bandwidth 75 mV p-p
Hold-up time 90 ms
Current adjustment range 100-0 %
Minimum Load Voltage See the models table
* Tested with 0.1µF (M/C) or (C/C) and 10µF (E/C) parallel capacitors at the end.
Isolation Specifications
Parameters Conditions Typical Maximum Units
Tested I/O voltage 3 sec/3.5mA 3000 VAC
Isolation Resistance >1000 MΩ
 AC-DC Constant current LED Driver

Over Temperature Protection
 Input range 90-277VAC/47-440Hz

Waterproof Case rated IP67
 High Efficiency up to 89%

Power Factor Correction
 Operating temperature -40 to 85°C

SCP, Over Current Protection