Datasheet

Series AMEPR30-AZ
up to 2.5A | AC-DC LED driver
www.aimtec.com Tel: [phone] Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052.1e R3.D 1 of 13 North America only
FEATURES:
Models
Single output
Model
Max Output
Power (W) *
Output
Voltage
Range (V)
Output
Current (A)
Input Voltage
(VAC/Hz)
Input Voltage
(VDC)
Efficiency
(%)
AMEPR30-5070AZ 35 36-50 0.7 90-277/47-440 120-390
86
AMEPR30-4864AZ 30.72 36-48 0.64 90-277/47-440 120-390
86
AMEPR30-36100AZ 36 24-36 1 90-277/47-440 120-390
85
AMEPR30-24140AZ 33.6 12-24 1.4 90-277/ 47-440 120-390
84
AMEPR30-12250AZ 30 5-12 2.5 90-277/47-440 120-390
83
*Exceeding the maximum output power will permanently damage the converter
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Input Specifications
Parameters Conditions Typical Maximum Units
Inrush current <2ms
115VAC 25
A
230VAC 40
Leakage current
115VAC 0.3
mA
230VAC 0.5
AC current
115VAC 0.33
A
230VAC 0.16
Power Factor
115VAC 0.99
230VAC 0.97
External fuse 250V/1A
Start up time 450 ms
Output Specifications
Parameters Conditions Typical Maximum Units
Current accuracy ±2 %
Line regulation LL-HL ±1 %
Load regulation 0-100% load ±2 %
Ripple & Noise * 20MHz Bandwidth 75 mV p-p
Hold-up time 50 ms
Current adjustment range 100-0 %
Minimum Load Voltage See the models table
* Tested with 0.1µF (M/C) or (C/C) and 47µF (E/C) parallel capacitors at the end.
Isolation Specifications
Parameters Conditions Typical Maximum Units
Tested I/O voltage 3sec 3000 VAC
Isolation Resistance >1000 MΩ
 AC-DC Constant current LED Driver

Over Temperature Protection
 Input range 90-277VAC/47-440Hz

Waterproof Case rated IP67
 High Efficiency up to 86%

Power Factor Correction
 Operating temperature -40 to 85°C

SCP, Over Current Protection