Product Manual

- 20 -
3.3 AC Wiring
We recommend using 10 to 8 AWG wire to connect to the ac terminal block.
When in AC mode the AC input power will supply both the loads and AC charger, a thicker wire gauge for
AC Input is required. Consult a qualified electrician about the specific wire gauge required in terms of wire
material and inverter power.
There are 3 different ways of connecting to the terminal block depending on the model. All the wirings are
CE compliant, call our tech support if you are not sure about how to wire any part of your inverter.
Single-Phase Wiring Mode
230Vac or 120Vac
Input: Hot line+Neutral+Ground
Output: Hot line+Neutral+Ground
Dual-Phase Wiring Mode
240Vac split phase
Input: Hot line+ Hot line +Ground
Output: Hot line+ Hot line +Neutral