User's Manual

4
3
2
1
1 Adjustment cap
2 Cap
3 Elevation adjustment
screw
4 Windage adjustment
screw
Fig. 2 Remove adjustment cap and cap
d Use the adjustment cap (1) or the tool (12 A) to turn the
adjustment screws (4) and (3). Place the knobs on the
adjustment cap (1) into the recesses on the adjustment
screws (4) and (3).
e Windage adjustments (see Fig. 3):
• Turn windage adjustment screw (4) counterclockwise
to move point of impact to the right.
• Turn windage adjustment screw (4) clockwise to
move point of impact to the left.
f Elevation adjustments (see Fig. 4):
• Turn elevation adjustment screw (3)
counterclockwise to move point of impact up.
• Turn elevation adjustment screw (3) clockwise to
move point of impact down.