User's Manual

hand and by the use of the tool (12 B). Keep lens covers
(10) and (11) closed when the sight is not being used.
Clean lenses and wipe the sight dry after exposure.
Dust storms and sand storms: keep lens covers (10)
and (11) closed when the sight is not being used.
High altitudes: no special procedures required.
CAUTION: Never clean the lenses with ngers. Use
lens paper/cloth. If lens paper/cloth is not available:
To clear away debris (sand, grass etc.): blow away
the dirt or rinse with clear water.
To clean lenses: fog the lenses or rinse with clear
water and clean them with a soft piece of cloth.
4 TROUBLESHOOTING
The red dot does not appear or has disappeared
Clean contact surfaces and verify that the battery (6) is
working and that it is installed correctly according to 2.1.
Verify that there is zero gap between the battery cap (5)
and the battery compartment (see Fig. 5). If the intensity
switch (7) is defective, notify local dealer/armourer.
Fig. 5 The battery compartment and the battery cap