User's Manual
NOTE: Each click of the adjustment screws
corresponds to a 13 mm movement of the point of
impact at 100 m or 0.5 in at 100 yds.
Fig. 3 Windage
adjustments
Fig. 4 Elevation
adjustments
g Conrm zeroing by ring at least three shots at a
zeroing target. Check points of impact to conrm
accuracy and repeat zeroing procedure if required.
h After initial ring, ensure the sight is securely installed
on the weapon.
3 EXTREME CONDITIONS
• Extreme heat (moist or dry): no special procedures
required.
• Extreme cold: extreme cold might shorten battery life.
The intensity switch (6) can be more difficult to operate
than at normal temperatures.
• Salt air: no special procedures required.
• Sea spray, water, mud, snow: ensure the battery cap
(4) and the adjustment caps (1) are tightened. Tighten
the adjustment caps (1) and the battery cap (4) by hand










