User's Manual
1 PRESENTATION
Aimpoint
®
CompM4 and CompM4s are designed to be mounted on a
rearm with a MIL-STD 1913 Picatinny rail or Weaver rail. Height of optical
axis can be adjusted by adding or removing a spacer to the conguration.
2 ASSEMBLE SIGHT, MOUNT AND SPACER
2.1 Sight and mount only
Assemble the sight to the mount using two short screws. Tighten rmly. It
is recommended to use thread sealer on the screw threads. Height of the
optical axis (from the top of the rail) when not using a spacer is 30 mm (1.2")
for CompM4 and CompM4s.
2.2 Sight, mount and spacer
Assemble the sight to the mount and spacer using two long screws. Tighten
rmly. It is recommended to use thread sealer on the screw threads. Height
of the optical axis (from the top of the rail) when using a standard spacer is
39 mm (1.5") for CompM4 and CompM4s.
2.3 Sight, mount and extension spacer
Assemble the sight to the mount and extension spacer using four short
screws. Tighten rmly. It is recommended to use thread sealer on the screw
threads. Height of the optical axis (from the top of the rail) when using an
extension spacer is 39 mm (1.5") for CompM4 and CompM4s.
3 AIMPOINT
®
MOUNTS
3.1 LRP mount for CompM4™ / CompM4s™
The LRP mount is a quick detach mount for mounting on a MIL-STD 1913
Picatinny rail.
Technical specification
Weight 75 g / 2.7 oz
Height of optical axis (no spacer) 30 mm / 1.2"
Length 79 mm / 3.1"
Width 47 mm / 1.9"