User's Manual

6
8
9
7
6 Adjustment cap
7 Cap
8 Windage adjustment
screw
9 Elevation adjustment
screw
Fig. 2 Remove adjustment caps
d The adjustment cap (6) or the tool (14 A) must be used
to turn the adjustment screws (8) and (9). Place the
knobs on the adjustment cap (6) into the recesses on
the adjustment screws (8) and (9).
e Windage adjustments (see Fig. 3):
• Turn windage adjustment screw (8) counterclockwise
to move point of impact to the right.
• Turn windage adjustment screw (8) clockwise to
move point of impact to the left.
f Elevation adjustments (see Fig. 4):
• Turn elevation adjustment screw (9)
counterclockwise to move point of impact up.
• Turn elevation adjustment screw (9) clockwise to
move point of impact down.