User's Manual
f Elevation adjustments (see Fig. 4):
• Turn elevation adjustment screw (8)
counterclockwise to move point of impact up.
• Turn elevation adjustment screw (8) clockwise to
move point of impact down.
NOTE: Each click of the adjustment screws (7) and (8)
corresponds to a 10 mm movement of the point of
impact at 100 m or .36 in at 100 yds.
Fig. 3 Windage
adjustments
Fig. 4 Elevation
adjustments
g Conrm zeroing by ring at least three shots at a
zeroing target. Check points of impact to conrm
accuracy and repeat zeroing procedure if required.
h After initial ring, ensure the sight is securely installed
on the weapon.