User's Manual

2.3 Zeroing
CAUTION: Do not continue to adjust windage and
elevation screws (7) and (8) if you encounter resistance.
a Open lens covers (3) and (4).
b Adjust the intensity (5) to a comfortable setting for the
red dot to contrast against the target.
c Remove the two adjustment caps (6) to access the
windage adjustment screw (7) and the elevation
adjustment screw (8). See Fig. 2.
Fig. 2 Remove adjustment caps
d The adjustment caps (6) or the tool (13A) must be used
to turn the adjustment screws (7) and (8). Place the
knobs on any of the adjustment caps into the recesses
on the adjustment screws (7) and (8).
e Windage adjustments (see Fig. 3):
• Turn windage adjustment screw (7) counterclockwise
to move point of impact to the right.
• Turn windage screw (7) clockwise to move point of
impact to the left.