Maintenance Manual

CHAPTER I
1.1 PRESENTATION

mainly for military and law enforcement applications.

which greatly enhances situational awareness and target acquisition speed.
Thanks to the parallax-free design, the dot follows the movement of the user’s eye

the Sight allows for unlimited eye-relief and is compatible with 1st , 2nd and 3rd
generation night vision devices.

low power consumption gives an unequalled battery life.


through reinforced design.
The Sight is provided with a torque knob, Quick Release (QRP2) mount.
The Sight has a Spacer system that gives optimal height of the line of sight (opti-
cal axis) on different weapons.
1.2 SPECIFICATION
Material - housing: Extruded, high strength aluminum
Surface nish: 
Material – lens covers: Rubber, black
Optical magnication: 1X
Eye relief: Unlimited, no centering required
Optical coating: 
 
Band Pass coating for NVD* compatibility
Dot size: 
Switch, dot brightness: 
Battery:  
alkaline/lithium 1.5V or lithium 3-3.7V (acceptable
voltage 1.2 – 5.0 V)
c) Install Cap Battery by turning clockwise until snug. Hand tighten only.
Using tools could damage equipment.
d) Verify that red dot is present by turning the Knob Switch (10) clockwise.
2.1.2 Installing Sight on the weapon


Depending on type of weapon, the optical line of sight (the centre of the lens
system) may have different optimal height over the mounting rail. The height


 

Loctite) could be used on the screw threads. See Fig A below.
or



Fig B below.
b) Install the Sight to the weapon rail by using the Knob, Torque (12). Ensure

on the Picatinny Rail. To ensure that Sight is secure, tighten Knob, Torque
(12) until it snaps twice.
c) When using Lens Covers, ensure that they are correctly positioned and can
easily be opened/removed.
 
weapon rail.
 
Battery life: 
pos 12 of 16 and over 3 years at pos 13 of 16.
(at room temperature and with a quality battery)
Typically 500 000 h at NVD setting
Length: 
Width: 
Height: 
Weight: 
Adjustment: Range ±2 m at 100 meters (±2 yds at 100 yds), in
windage and elevation, 1 click = 4 mm at 25 meters
 
Mounting: 
available for optimal height
Height of optical axis***: 
QRP2 mount and Spacer
Max temperature range: -45 ºC to +70 ºC (-50 ºF to +160 ºF), in storage
and operation
Water resistance: Submersible to 45 m (150 ft)
* NVD: Night Vision Device
** MOA 
*** Over top surface of Picatinny Rail

See gure next page
CHAPTER II


WARNING: Ensure the weapon is unloaded and the safety selector is in the

the sight.
2.1.1 Installing Battery
a) Remove Cap Battery (4) by turning it counter clockwise.

Caution while replacing battery (not necessary when the sight is new).
Before installing Cap Battery, inspect that the O-ring is present and not damaged.
Failure to do so could result in water leakage into the battery compartment.
1. Cap Adjustment (2 pcs)
2. Strap (for Cap Adjustment) (2 pcs)

4. Cap Battery
5. Strap (for Cap Battery)


(2 pcs)

9. Spacer
10. Knob, Switch
11. Screw Adjustment (2 pcs)

13. Lens Cover (Bikini)
14. Allen Wrench for screws
(pos.6 and 7)

Fig A without spacer Fig B with spacer