Manual

CHAPTER I

1.1. Presentation

Aimpoint’s Reflex Sights are rugged precision electronic optical red dot

sights developed for civilian, military and law enforcement applications.

Aimpoint sights are designed for the ”two eyes open” method of sighting,

which greatly enhances situational awareness and target acquisition speed.

Thanks to the parallax-free design, the dot follows the movement of the

user’s eye while remaining fixed on the target, eliminating any need for

centering. Further, the sight allows for unlimited eye-relief. The CompM2

is compatible with 1

, 2

and 3

generation night vision devices, while

the CompML2 is optimized for applications, which do not require night

vision compatibility. Aimpoint has now introduced the CETechnology, a

radical advancement in red dot sighting performance with over 30 times

longer battery life than the existing XD - sights.

1.2 Specification – Model CompM2, CompML2, CompM2-2X and

CompML2-2X

Material - housing: Extruded, high strength aluminum, anodized

Surface finish: Hard Anodized, Graphite Grey, matte

Material – lens covers: Thermoplastic elastomer, black, non-glare

Optical magnification: 1X for all models except for 2X

Eye relief: Unlimited, no centering required

Optical coating: Anti Reflex coating, all surfaces

Multi-layer coating for reflection

Band Pass coating for NVD compatibility (CompM2)

Dot size: 4 MOA except for 2X, which has 2 MOA dot size

Switch, dot brightness: CompM2 / M2-2X: 10 positions: 4 NVD,

6 daylight of which 1 Extra Bright

CompML2 / ML2-2X: 10 positions:

1 Off, 9 daylight of which 1 Extra Bright

Battery: One 3 Volt Lithium battery type 2L76 or DL1/3N

Battery life* (hours): 1000 – 10.000 h (typically 10 years at

CompM2 NVD position)