Specifications

PISTOL TYPE
Model Torque Range Free Speed Overall Length Weight From Center to Outside Noise Average Air
(approx.) (Soft Joint) (approx.) (approx.) (approx.) (approx.) Level Consumption
Nm in-lbs rpm mm in lb kg mm in dB(A) ft
3
/min
US-LT31PB-05 0.98~5.59 8.7~49.6 500 200 7.9 1.9 0.8 16.0 0.6 73 7.0
US-LT31PB-11 0.3 ~1.96 3.5~17.4 1,100 170 6.7 1.6 0.7 15.5 0.6 73 7.0
US-LT31PB-17 0.39~1.47 3.5~13.0 1,700 170 6.7 1.6 0.7 15.5 0.6 73 7.0
US-LT31PB-23 0.39~0.98 3.5~8.7 2,300 170 6.7 1.6 0.7 15.5 0.6 73 7.0
US-LT41PB-08 0.98~3.92 8.7~34.7 800 185 7.2 1.8 0.8 16.5 0.6 74 10.5
US-LT41PB-15 0.98~2.17 8.7~19.1 1,500 185 7.2 1.8 0.8 16.5 0.6 74 10.5
US-LT41PB-21 0.9 ~1.67 8.7~14.8 2,100 185 7.2 1.8 0.8 16.5 0.6 74 10.5
US-LT51PB-05 1.47~10.30 13.0~91.1 480 205 8.5 2.6 1.2 19.5 0.7 75 17.5
US-LT51PB-08 1.47~5.40 13.0~47.7 800 205 8.5 2.6 1.2 19.5 0.7 75 17.5
US-LT51PB-17 1.47~2.80 13.0~25.1 1,700 205 8.5 2.6 1.2 19.5 0.7 75 17.5
US-LT60P-03(P) 6.80~16.66 60.0 ~147.6 320 240 9.4 3.7 1.7 22.0 0.9 75 21.0
US-LT60P-07(P) 3.92~9.80 34.7~86.8 650 230 9.0 3.7 1.7 22.0 0.9 75 21.0
US-LT60P-11(P) 2.94~5.88 26.0~52.1 1,100 230 9.0 3.7 1.7 22.0 0.9 75 21.0
Each model is equipped with its standard clutch spring. Additional clutch springs specifications are available on page 38
(P) DENOTES 3/8” SQ. DRIVE FOR US-LT60P SERIES.
Air Hose Size: 1/4” for US-LT31PB & US-LT41PB Series Air Inlet Thread (Pipe Tap) : N.P.T. 1/4”
3/8” for US-LT31PB-05, US-LT51PB Series & US-LT60P Series
SPECIFICATIONS
Recommended Air Pressure: 85 psi
TORQUE CONTROL
“LITE TOUCH”
S
ERIES
Torque Reaction Bar Standard
with US-LT60P Series
US-LT31PB-05
US-LT31PB
SERIES
US-LT41PB
SERIES
US-LT51PB
SERIES
US-LT60P
SERIES
US-LT60P(P)
SERIES