Specifications

Model Torque Range Free Speed Overall Length Weight From Center to Outside Noise Average Air
(approx.) (Soft Joint) (approx.) (approx.) (approx.) (approx.) Level Consumption
Nm in-lbs rpm mm in lb kg mm in dB(A) ft
3
/min
US-LT10B 0.20~0.59 1.7~5.2 1,000 191 7.5 0.6 0.3 12 0.5 70 5.2
US-LT20B-10 0.15~1.08 1.3~9.5 1,000 180 7.1 0.7 0.3 13 0.5 71 5.6
US-LT20B-18 0.15~0.67 1.3~6.1 1,800 180 7.1 0.7 0.3 13 0.5 71 5.6
US-LT20B-26 0.15~0.34 1.3~3.0 2,600 180 7.1 0.7 0.3 13 0.5 71 5.6
US-LT30B-11 0.39~1.96 3.5~17.4 1,100 183 7.2 0.9 0.4 16 0.6 73 7.0
US-LT30B-17 0.39~1.47 3.5~13.0 1,700 183 7.2 0.9 0.4 16 0.6 73 7.0
US-LT30B-23 0.39~0.98 3.5~8.7 2,300 183 7.2 0.9 0.4 16 0.6 73 7.0
US-LT40B-08 0.98~3.92 8.7~34.7 800 205 8.1 1.4 0.6 17 0.6 74 10.5
US-LT40B-15 0.98~2.17 8.7~19.1 1,500 205 8.1 1.4 0.6 17 0.6 74 10.5
US-LT40B-21 0.98~1.67 8.7~14.8 2,100 205 8.1 1.4 0.6 17 0.6 74 10.5
US-LT50B-05 1.47~10.30 13.0~91.1 480 240 9.4 2.2 1.0 20 0.8 75 17.5
US-LT50B-08 1.47~5.40 13.0~47.7 800 240 9.4 2.2 1.0 20 0.8 75 17.5
US-LT50B-17 1.47~2.80 13.0~25.1 1,700 240 9.4 2.2 1.0 20 0.8 75 17.5
Each model is equipped with its standard clutch spring. Additional clutch springs specifications are available to provide a full torque range
of each model on page 38.
Air Hose Size: 1/4” for US-LT10B - US-LT40B Series Air Inlet Thread (Pipe Tap): 1/8” for US-LT10B - US-LT20B Series
3/8” for US-LT50B Series 1/4” for US-LT30B - US-LT50B Series
SPECIFICATIONS
Recommended Air Pressure: 85 psi
TORQUE CONTROL
“LITE TOUCH”
S
ERIES
INLINE PUSH-TO-START
TYPE
US-LT10B
US-LT20B
US-LT40B
US-LT50B
ERGONOMIC
NEOPRENE GRIPS
STANDARD WITH
MODELS LT10B -
LT40B SERIES
US-LT30B-11
PNEUMATIC SCREWDRIVERS