Specifications

Model Fastening Torque Free Speed (no load) Weight Length Bit-Shank
(approx.) (approx.) (aaprox.) (approx.)
kgf-cm in-lbs rpm lb kg mm in
CE-350* .86~4.0 .75~3.5 730 0.4 .20 160 6.3 0 2.5MM***
CR-1000 2.5~7.5 2.2~6.7 300~1,000** 1.4 .64 267 10.5 1/4” HEX
CR-1100 4~17 3.4~14.7 600~2,100** 1.4 .64 267 10.5 1/4” HEX
CR-1200 7~27 6.1~23.4 300~1,000** 1.4 .64 267 10.5 1/4” HEX
*CE-350 contains sealed brush-type motor. Not certified for Class 100 use.
**R.P.M. selection dial and soft start selection switch on Power Supply Unit
***1/4” bit adapter option available. Order no. AE-350BA
Model Power Source Dimensions Weight Available for
(approx.) Driver Models
(W x H x D) (in) lb kg
AE-PSL* AC 110/120V, 60Hz 3 x 4-1/4 x 6-1/4 6.2 2.8 CE-350
CR-PS AC 110/120V, 60Hz 3-3/4 x 2 x 7-3/4 1.6 0.7 CR-Models
*AE-PSL does not come standard with the tool. Must be ordered separately.
SPECIFICATIONS
CR-PS CONTROLLER
CE-350
CR-1000
CR-1100
CR-1200
ELECTRA DC
B
RUSHLESS SERIES
● Approved for Clean Room
Environment - Can be used in Clean
Room to Class 100.
● High Reliability and Long Tool
Life - Use of brushless electric motor
and non-mechanical switch insures
reliable long life and low maintenance.
● Adjustable RPM Selection -
Allows you to choose which RPM is
best suited for proper fastening speed
and operator control.
● Soft Start Selection - Allows the
choice of engaging fastener at an initial
RPM for early thread engagement.