Specifications

AW6FMS
AW6FMF
AW3FMF
AW3FMS
CREATE YOUR OWN SUPPORT SYSTEMS TO SUIT
YOUR SPECIFIC NEEDS USING WORKSTATION
ASSEMBLIES OR COMPONENTS, ERGO-ARMS,
AND BALANCERS FROM AIMCO.
■ Organize work areas to create a safe, productive working environment
■ Reduce risk of cumulative trauma to worker by providing full support of tools
■ Protect valuable tools, fixtures, and monitoring devices from damage by
suspending them out of the way
13.0”
AW3FMS Floor mounted
3 ft swinging jib
AW3FMF Floor mounted
3 ft fixed jib
Maximum weight 30 lbs
Column height: 6 ft
AW6FMS Floor mounted
6 ft swinging jib
AW6FMF Floor mounted
6 ft fixed jib
Maximum weight 50 lbs
Column height: 9 ft
All floor mounted units include:
end stop, balancer trolley and intermediate carrier
AIMCO TOOL SUPPORT ARMS
BENCH MOUNTED WORKSTATION:
JJ-30-S
■ 30 lbs. maximum weight
■ 48” column height including
mounting plate
■ 3 ft. swinging jib
includes balance trolley, end stop and cap
■ beige polyester finish
*BENCH MOUNTED WORKSTATION
WITH TORQUE ARM: JJ-30TA
■ 5 lb. maximum weight
(RPA-3 included)
■ 5’ column height
including mounting plate
■ 38” jib length (swinging)
■ 15 ft/lbs. torque rating
■ 3/8” NPT inlet
■ 1/4” NPT outlet
■ beige polyester finish
■ 1/4” braided air hose
■ 21” maximum vertical
arm travel
*For use with pneumatic tools only.
*TROLLEY MOUNTED TORQUE
ARM WITH 3 LB. RETRACTOR
AND HOSE: FA50-2
Application: To move
front to back along
overhead jib
ROLLING HANGER: ABT5-R
Application: To
support a runway
and allow X/Y
axis movement
Example: Crosstracker
*TROLLEY MOUNTED TORQUE
ARM WITH 3 LB.
RETRACTOR
AND HOSE: TA50-2
Application: To move
along overhead tool
rail or side to side
90° CONNECTOR
FOR 3/8” HOSE:
WSCH
Brass fittings attach
to balancer trolley
for stable transfer of
air line to tool below
20 inches