Specifications

WORKSTATION
COMPONENTS AND
ASSEMBLIES
COMPLETE ASSEMBLIES
WALL MOUNTED RUNWAY: AWR6
6 ft of runway and 6 ft jibs includes balancer
trolley, two end stops, two hanger brackets and
four end caps.
50 lb weight
capacity.
AW3S
AJS3*
AW3F
1.26
1.18
0.47
1.575
1.575
0.55
2.25
0.562
DIA.
6.00
5.00
4.00
3.50
6.00
(152)
6.00
(152)
4.00
1.50
3.00
2.50
0.41 DIA. TYP
0.531 DIA. TYP
6.00
6.00
6.00
BALANCER
TROLLEY: ABT-3/5
Black polyester finish
used as moving supports
for balancers, hose/cable
safety cables. Runs through
horizontal track
• ABT-3 for 30 lb. Track (1.00 dia.)
• ABT-5 for 50 lb. Track (1.25 dia.)
HANGER BRACKET: AHB-3/5
Black polyester finish
used to support/hang
a single piece of track
VERTICAL COLUMN:
AVC-5
Beige polyester finish used
to support jibs at 90 degree
angle to column
Height: 9 ft
INTERMEDIATE CARRIER:
AIC3-2 (30 lb. Track)
AIC5-2 (50 lb. Track)
Black polyester finish
used to festoon cable/
hose freely along track.
Supports hose cable
OD .60-.94
U-BOLTS: AUB-5
Zinc plated steel (3 required)
used to secure fixed/
swinging jibs (AW6S
and AW6F) to
vertical column
END CLAMP: AEC5-2
Black polyester finish
used to prevent trolleys
from “overtravel.”
Continues festoon to
end of track. Cable/hose
OD .60-.94 Used on
both AT5/AT3 Track.
SUPPORT CLAMPS: ASC-5
Black polyester finish
used to secure the
vertical track to back
of bench/conveyor
for stability
TOOL CLIP: SH-5
Steel clip with safety latch
for tool attachment and other
uses. Measures 2.375” long.
COMPONENTS
TRACK
Used both for vertical and horizontal supports
Beige polyester finish
Part Number 30# Track
AT3-3 3 ft track
AT3-4 4 ft track
AT3-6 6 ft track
AT3-9 9 ft track
Part Number 50# Track
AT5-3 3 ft track
AT5-4 4 ft track
AT5-6 6 ft track
AT5-9 9 ft track
AT5-12 12 ft track
TRACK NUT: ATN-3/5
Zinc plated steel (2 required)
used to attach joint/hanger
bracket to horizontal track
ATN-3-30 lb./ATN-5 .50 lb.
END STOP: AES-3/5
Zinc oxide finish used to
prevent balancer trolley
from “overtraveling” the
horizontal track
AES-3-30 lb./AES-50 for 50 lb.
MOUNTING PLATE:
AMP-5
Black polyester finish
used for a base to
mount vertical
uprights to
floor or bench top
END CAP: AEP-3/5
Black molded vinyl used
to cap off ends of track for
professional finish and
avoids rough edges
• AEP-3 for 30 lb. Track
• AEP-5 for 50 lb. Track
ANGLE BRACKET: AB-3/5
Black polyester finish
used to mount horizontal
track to vertical upright
(adjustable)
• AB-3 for 30 lb. Track
• AB-5 for 50 lb. Track
JOINT HANGER
BRACKET: AJH-3/5
Black polyester finish used
to couple and hang multiple
pieces of track
AJH - 3 for 30 lb. Track
AJH - 5 for 50 lb. Track
WALL MOUNTED JIBS:
AW3S 3 ft swinging jib
AW3F 3 ft fixed jib
AJS3
*
3 ft swinging jib for channel mount
Jibs are mounted to wall or beams
to create free standing workstations.
End stop, end cap and
balancer trolley included.
Maximum weight 30 lbs.
AW6S 6 ft swinging jib
AW6F 6 ft fixed jib
Jibs can be wall mounted or attached
to vertical column (AVC-5) to
create a freestanding workstation.
End stop, end caps and
balancer trolley are included.
Maximum weight 50 lbs.
All complete assemblies are beige polyester finish
and include balancer trolley, end caps and end stops.
Floor mounted assemblies are not able to ship via
UPS.
When choosing a workstation system, remember...
total weight capacities should include tool balancer,
balancer, hose/cable and tool/fixture. Units need to
be supported vertically and horizontally every 6 ft.
*AJS3 Does not include balancer trolley.
0.41 DIA. TYP
3.00
5.00
4.5
AW6F
AW6S
14 GA
11 GA
AJH-5 Shown
5.5
1.0
AHB 3 for 30 lb.
AHB 5 for 50 lb.
WORKSTATION COMPONENTS AND ASSEMBLIES