Specifications

ERGO
-
ARM
®
TOOL SUPPORT SYSTEMS
Reduce operator fatigue and increase
productivity with the ERGO-ARM
®
ergonomic tool support system series.
■ For use with pneumatic and
electric tools
■ Custom designs available
AD-D1098-PL PRECISION LINEAR ARM
■ Tracks perpendicular to workpiece on
three moving axis (X,Y,Z) to provide
maximum mobility and ease of
movement.
■ Push button relief valve for no
resistance for operator
■ Also compatible for use with an
automatic screwfeeder head
AD-D1098-SAC AIR CYLINDER SERIES
■ Allows universal tool motion from side to side
and front to back
■ 2-piece hinged forearm allows more freedom of
movement in the assembly process
■ Telescoping reach from end of forearm allows easy
adjustment in 1-inch increments up to 6 inches
■ Also compatible for use with an automatic
screwfeeder head
AD-D1098-S OIL CYLINDER SERIES
■ Allows universal tool motion from
side to side and front to back
■ 2-piece hinged forearm allows
more freedom of movement in the
assembly process
■ Telescoping reach from end of
forearm allows easy adjustment in
1-inch increments up to 6 inches
AD-D1098-SBL ECONOMY
■ Allows universal tool motion from
side to side and front to back
AD-D1098 PARALLEL SERIES
■ Available in air or oil cylinder styles
■ Compatible for use with an air or
electric screwdriver
■ Eliminates operator influence
AD-D1098-SAC AD-D1098-PAC
AD-D1098-S
AD-D1098-SBL
AD-D1098-PL
SPECIFICATIONS
Model Description Reach Capacity Maximum Torque*
AIR CYLINDER SERIES
AD-D1098-PL 24 Precision Linear 24” 15 Lbs. 25 Ft. Lbs.
AD-D1098-PL 36 Precision Linear 36” 15 Lbs. 25 Ft. Lbs.
AD-D1098-SAC Standard 4-33” 0-15 Lbs. 110 In. Lbs.
AD-D1098-PAC Parallel 4-33” 0-15 Lbs. 110 In. Lbs.
AD-D1098-PACE Parallel (Electric Tool) 4-33” 0-15 Lbs. 110 In. Lbs.
AD-D1098-SAC-CR Standard Clean Room 4-33” 0-15 Lbs. 110 In. Lbs.
AD-D1098-PAC-CR Parallel Clean Room 4-33” 0-15 Lbs. 110 In. Lbs.
OIL CYLINDER SERIES
AD-D1098-S Standard 4-33” 0-3 Lbs. 110 In. Lbs.
AD-D1098-SBL Economy 19-27” 0-3 Lbs. 110 In. Lbs.
AD-D1098-P Parallel 4-33” 0-3 Lbs. 110 In. Lbs.
AD-D1098-PE Parallel (Electric Tool) 4-33” 0-3 Lbs. 110 In. Lbs.
■ If the above models do not meet your needs, custom designs are available. ■ Anodized or Powder Coating in custom colors available upon request.
*Max. torque allowed may be dependent on tool clutch type and joint rate.
ERGO-ARM
®
TOOL SUPPORT ARMS