Specifications

STATIONARY
TRANSDUCERS
AND JOINT
SIMULATORS
The Crane Stationary Transducers and Joint Simulators provide quick
and easy torque testing, verifying and calibrating of hand torque tools
and power tools.
There are two groups of stationary transducers - Industrial and Metrology.
● The Metrology group of transducers have very high accuracy and
are used explicitly in torque metrology labs. The metrology transducers
are only available as Industry Standard (IS) type and should never be
used for testing or verifying power tools.
● The Industrial stationary transducers are available in two styles -
Industry Standard (IS) and UTA.
- Industry Standard style is manufactured with a military type
connector and the torque signal is 2 mv output per volt of excitation.
This style transducer will work with most torque analyzers and
readouts.
- UTA style is manufactured with a “smart chip” in the connector
and will automatically identify itself to the Crane family of
torque analyzers and controllers. When using this style the user is
not required to select span, range or mv per volt parameters.
The Crane Joint Simulators provide a means of testing power tools on
a repeatable, linear and accurate simulated joint. Joint rates can be
modified for a variety of applications. The mechanism is engineered to
have zero backlash and has a common centerline with the axis of the
transducer which provides accurate torque results.
CRANE
Features include:
● Transducers feature
precision female
square drives to
facilitate testing of
hand and power
tools
● Transducers are
available in 1/4”
to 1” square drive
● Heavy duty stainless
steel transducer
allows 140%
overload capacity
● Joint Simulators are
flanged for easy
mounting to work
surface
TRANSDUCERS AND JOINT SIMULATORS