Specifications

SPECIFICATIONS

● Accuracy Better than +/- 1% FSD

● Zero Drift Better than +/- .1% FSD per degree Celsius

● Overload Capacity 125% FSD

● Operating Temperature 5 - 40 degrees Celsius

● Case Rating IP40

● Drag Friction Less than .1% rated torque or .1NM

● Angle Measurement 2-phase quadrature signed with stated resolution

● Square Drives Designed to fit ANSI, BS and DIN square standards

● Heavy Duty Coil Cable 3 feet long relaxed / 10 feet long extended

● Warranty 12 months parts and labor on manufacturing defects

Drive Overall Thickness Width Length of Side to Housing to Weight

Length Housing Center Shaft End

(A) (B) (C) (D) (E) (F)

1/4” Hex* 4 9/16” 1 1/8” 2 3/16” 2 3/16” 1/2” 1 1/2” 1 Lb

1/4” Sq 2 7/8” 1 1/8” 2 3/16” 2 3/16” 1/2” 1/4” 1 Lb

3/8” Sq 3” 1 1/8” 2 3/8” 2 3/16” 9/16” 3/8” 1 1/4 Lb

1/2” Sq 3 7/16” 1 5/8” 2 3/4” 2 5/16” 7/8” 7/16” 1 1/2 Lb

3/4” Sq 4 1/8” 2” 3 1/8” 2 3/8” 1” 7/8” 2 1/4 Lb

1” Sq 4 15/16” 2 7/16” 3 5/8” 2 9/16” 1 1/4” 1 1/8” 4 Lbs

* 1/4” Hex Models have 1” Hex Engagement

Drive Size Torque Capacity Part Numbers Pinned shafts Angle Versions

1/4” Hex 15 In Lb UTA-449-0002 -OP -AP

1/4” Hex 44 In Lb UTA or IS -449-0005 -OP -AP

1/4” Hex 100 In Lb UTA-450-0010 -OP -AP

1/4” Hex 180 In Lb UTA or IS -450-0020 -OP -AP

1/4” Sq 100 In Lb UTA-451-0010 -OP -AP

1/4” Sq 180 In Lb UTA or IS -451-0020 -OP -AP

3/8” Sq 225 In Lb UTA-452-0025 -OP -AP

3/8” Sq 50 Ft Lb UTA or IS -452-0075 -OP -AP

1/2” Sq 133 Ft Lb UTA or IS -453-0180 -OP -AP

3/4” Sq 180 Ft Lb UTA-454-0250 -OP -AP

3/4” Sq 368 Ft Lb UTA or IS -454-0500 -OP -AP

1” Sq 550 Ft Lb UTA-455-0750 -OP -AP

1” Sq 1025 Ft Lb UTA or IS -455-1400 -OP -AP