Specifications

SPECIFICATIONS
ToolStar Part #UTA-444-V-0
● Selectable A/D converter speed for plotting
● Sample rate - 8 Khz
● Menu prompting backlit LCD Supertwist 240 x 128 pixels, 4 3/4” x 2 1/2”
● Zoom facility provides over 20:1 magnification
● Selectable Frequency Response from 361 to 6000 Hz
● Auto zero
● Serial baud rate selectable from 300 to 19,600
● Keypad with 29 tactile keys and 5 soft keys
● Printer is dot matrix, 144 dots per line
● Clock is 24 hour in European or US format
● Durable cast aluminum housing - 10 3/8” long x 6 1/4” wide x 4 1/2” deep (approx.)
● Carrying case is provided with instrument along with operations manual and PC cables
● Weight - 11 lbs
● AC power requirements - 92-264 Volts 50/60 Hz
● Operating temperature from 5 to 40 degrees Celsius
● Warranty is 12 months parts and labor on manufacturing defects
ForceStar Part #UTA-444-00-00
The ForceStar adds one channel of input to the two
channel ToolStar system. This channel is for a load cell
or load washer to monitor clamp force. The software of
the ToolStar is able to accomodate a third input channel.
The fastener load washer or load cell is calibrated to the
ForceStar by adjusting the ForceStar’s amplifier gain.
Nm
120.5
110.0
100.0
90.0
80.0
70.0
60.0
50.0
40.0
30.0
20.0
10.0
0.0
1.25 1.75 2.25 2.75 3.25 3.753
SECS
PLOTTING
Save Overlay Tor/Ang Print
Nm MSEC : 92.4 Nm : 24.95
30.83
27.75
24.67
21.58
18.50
15.42
12.33
9.25
6.17
3.08
0.00
86.5 89.5 92.5 95.6 98.6 101.6
MSECS
PLOTTING
+
PLOTTING
Save Overlay Tor/Tim Print
Nm MSEC : 30.3 Nm : 23.33
75.00
67.50
60.00
52.50
45.00
37.50
30.00
22.50
15.00
7.50
0.00
0.0 40.0 80.0 120.0 160.0 200.0
MSECS
+
TOOLSTAR SCREEN EXAMPLES
Up to 5 profiles may be overlaid for
comparison purpose
The Zoom facility enables detailed
examination of any part of a curve.
ToolStar works well with
pulse tools.
OPTIONAL SOFTWARE PRODUCTS
TOOLBASE Software Part #UTA-474-0-0 - PC based software to support the ToolStar analyzer. This program builds
databases of tool performance, tool plots, joint parameters and plots on joints. The software can store, recall, print
and download these profile plots. Will also manipulate and overlay plots for comparisons.