Specifications

● Increase Productivity
and Reduce Production
Costs
● Ensure Reliable and
Accurate Assembly
● Custom Adjusted to Fit
Your Application
AUTOMATIC SCREWFEEDERS
SPECIFICATIONS
DESIGNED FOR MODERN,
HIGH SPEED PRODUCTION
ASSEMBLY LINES.
The Acra-Feed
®
automatic screwfeed-
ing system delivers your fastener
directly
to the driving tool, eliminating manual
handling and placement of the fasten-
ers.
What better combination of benefits
than higher output, less fatigue, no
waste, and low cost. All of this – and
more – is available when you install the
Acra-Feed on your production line.
Perhaps the greatest benefit with any
Acra-Feed is reliability. Many competi-
tive units are sitting on shelves because
they became bottlenecks to efficient
assembly. There are more Acra-Feed
units in use today than any other unit!
This speaks for itself.
No other investment in your assembly
area will pay for its cost faster than the
Acra-Feed.
®
Model: A-100
Applicable Screws: M2-M5, (#2-#12)
Length of Screws: 6-28mm (1/4”-1”)
Hopper Capacity: 450cc (500-2500 screws)
Fastening Speed: Up to 70 screws/min.
Delivery Hose: 3.05m (10 ft.) standard
Air Pressure: 4-5kg/CM° (55-70 psi)
Max. Air Con.: 9 CFM
Electric Power: AC 110V, 20W
Weight: 20kg (44 lbs.) w/o driver
Dimensions: 7”Wx17”Lx16”H
Compatible for use with pneumatic or electric drivers
HOW TO ORDER:
The Acra-Feed units are custom adjusted to your application. To properly adjust the unit we need a sample of
the workpiece and about 100 of the fasteners. Once the samples are received a permanent file number is assigned to the application.
ACRA-FEED
®
SCREWFEEDERS