ZAPRASZAMY NA : www.techsystem.pl tel.
A I M C O SCREWDRIVERS Mechanical Torque Screwdrivers Electric Screwdrivers Pneumatic Screwdrivers Pulse Screwdrivers Battery Screwdrivers 6 8 11 15 19
MECHANICAL TORQUE SCREWDRIVERS QUALITY CONTROL IN TIGHTENING THREADED FASTENERS Ensure repeatable and consistent tightening for quality control in your assembly applications with the AIMCO mechanical torque wrench series. Torque Limiting Manual Screwdrivers ● ● ● ● ● Accurate and smooth rotary clutch disengages at the set torque. Lightweight and streamlined tool design ensures operator comfort and ease of use. Durable and high quality manufacturing for long tool life.
Click Wrench - Torque Indicating Ratchet Wrench Series ● ● ● ● ● ● S Model CWR-100 CWR-200 CWR-75F CWR-250F P E Min-Max Torque indicating tools provide a very repeatable and detectable action. Micrometer adjustable. Lightweight and streamlined tool design ensures operator comfort and ease of use. Overall length of the wrench is designed so the operator can comfortably apply torque without undue strain. 1/4” through 1/2” square drive sizes fit standard sockets Accuracy is ± 3% of indicated reading.
ELECTRIC SCREWDRIVERS ELECTRA SERIES ● ● ● ● Ergonomic Design Excellent Torque Control Long Tool Life External Brush Replacement ● ● ● ● External Torque Adjustment UL Listed Direct Plug-In Style State of the Art Motor Design AE-1511HS AE-7000 AE-8000 AE-2000 AE-4500 AE-1411 AE-2411 Pistol Grip Handle Attachment AE-7000A S P E PUSH-TO-START DIRECT PLUG-IN Model C I F Fastening Torque (approx.) kgf-cm in-lbs AE-1411 AE-2411 AE-1511HS 3~16.1 6.9~29.9 4~17.3 2.6~14 6.0~23.4 3.
ELECTRA DC BRUSHLESS SERIES ● Approved for Clean Room Environment - Can be used in Clean Room to Class 100. ● High Reliability and Long Tool Life - Use of brushless electric motor and non-mechanical switch insures reliable long life and low maintenance. ● Adjustable RPM Selection Allows you to choose which RPM is best suited for proper fastening speed and operator control. ● Soft Start Selection - Allows the choice of engaging fastener at an initial RPM for early thread engagement.
AIM/ELECTRA SLIP CLUTCH ELECTRIC SCREWDRIVER AIMCO’s Electra Series Model AE-2015 electric screwdriver offers high-speed performance for quick and consistent assembly and dissassembly. To maximize ergonomics and convenience, this driver offers a combination of a slip clutch with a high speed motor to provide low torque reaction and the best power-to-weight ratio in the industry. To insure tool reliability, an LED light notifies the operator when to change brushes.
PNEUMATIC SCREWDRIVERS TORQUE CONTROL “LITE TOUCH” SERIES INLINE PUSH-TO-START TYPE US-LT10B US-LT20B US-LT40B ERGONOMIC NEOPRENE GRIPS STANDARD WITH MODELS LT10B LT40B SERIES US-LT50B US-LT30B-11 Recommended Air Pressure: 85 psi S P Model E C I F I C Torque Range Free Speed Overall Length (approx.) (Soft Joint) (approx.) (approx.) Nm in-lbs rpm mm in A T I O Weight From Center to Outside (approx.) (approx.
TORQUE CONTROL “LITE TOUCH” SERIES PISTOL TYPE US-LT31PB-05 US-LT41PB SERIES US-LT31PB SERIES US-LT51PB SERIES US-LT60P SERIES US-LT60P(P) SERIES Torque Reaction Bar Standard with US-LT60P Series Recommended Air Pressure: 85 psi S P Model E C I Torque Range (approx.) (Soft Joint) Nm in-lbs F I C Free Speed Overall Length (approx.) (approx.) rpm mm in A T I O Weight From Center to Outside (approx.) (approx.
TORQUE CONTROL “LITE TOUCH” SERIES ANGLE AND LEVER TYPE US-LT30BL-11 US-LT30BL-17 US-LT30BL-23 US-LT40BL-08 US-LT40BL-15 US-LT40BL-21 US-LT40-03C US-LT40B-05C/08C/15C US-LT30B-11C Recommended Air Pressure: 85 psi S P Model E C I Torque Range (approx.) (Soft Joint) Nm in-lbs F I C Free Speed Overall Length (approx.) (approx.) rpm mm in A T I O N S Weight From Center to Hex Bit or Noise Average Air (approx.) Outside (approx.) Drive Size Level Consumption lb kg mm in in dB(A) ft3/min 3.
US-LT SERIES S P E Model OPTIONAL CLUTCH SPRINGS C I F I C Clutch Springs Provided Standard Option US-LT10/10B US-LT20B-10 Black Black Red Yellow US-LT20B-18 Red US-LT20B-26 US-LT31PB-05 Yellow Red US-LT30 Series, 1100 rpm Blue Yellow Pink US-LT30 Series, 1700 rpm Black Red US-LT30 Series, 2300 rpm US-LT40-03C US-LT40 Series, 800 rpm Pink Red Black Red Pink (not included) Pink Red Yellow US-LT40 Series, 1500 rpm Red US-LT40 Series, 2100 rpm US-LT50 Series, 500 rpm Yellow Black Y
PULSE SCREWDRIVERS U/UX SERIES 1/4” HEX DRIVE U-310SD U-350SD UX-500SD UX-612SD U-410SD UX-450SD UX-700SD Recommended Air Pressure: 85 psi S P Model U-310SD U-350SD U-410SD UX-450SD UX-500SD UX-612SD UX-700SD E C I Free Speed (approx.) rpm Torque Range (approx.) Nm ft-lbs 11,000 11,500 10,000 9,500 9,300 9,300 9,000 2.5~3.1 1.8~2.2 3.5~5.8 2.5~4.2 7~10 5~7.2 8~14 5.8~10 13~20 10~15 16~28 12~20 20~36 16~28 F I C Overall Length (approx.) mm in 222 238 250 233 244 253 249 8.7 9.4 9.
ALPHA/ALPHA-T SERIES 1/4” HEX DRIVE ALPHA-T45SDP PUSH-TO-START ALPHA-T40SD ALPHA-T45SD ALPHA-45SD ALPHA-50SD ALPHA-60SD Recommended Air Pressure: 85 psi S P Model ALPHA-T40SD ALPHA-T45SD* ALPHA 45SD ALPHA-50SD ALPHA-60SD E C I Free Speed (approx.) rpm Torque Range (approx.) Nm ft-lbs 3,900 6,000 5,500 7,500 7,000 3.5~6.2 2.5~4.5 8~11 5.8~8.1 13~20 9~14 18~28 13~20 22~35 16~25 F I Overall Length (approx.) mm in 270 270 242 232 244 10.6 10.6 9.5 9.0 9.
U/UX SERIES 1/4” HEX DRIVE U-350D U-410D UX-450D UX-500D UX-612D UX-622D UX-700D Recommended Air Pressure: 85 psi S P E Model Free Speed (approx.) rpm U-350D U-410D UX-450D UX-500D UX-612D UX-622D UX-700D 11,500 10,000 9,500 9,300 9,300 9,300 9,000 C I Torque Range (approx.) Nm ft-lbs 3.5~5.8 7~10 8~14 13~20 16~28 16~28 20~36 F I C Overall Length (approx.) mm in 2.5~4.2 5~7.2 5.8~10 10~15 12~20 12~20 16~28 All Tools Standard with 1/4” Quick Change Chuck.
ALPHA/ALPHA T SERIES 1/4” HEX DRIVE ALPHA-T50D ALPHA-T40D ALPHA-T46D ALPHA-45D ALPHA-50D ALPHA-61D Recommended Air Pressure: 85 psi S P Model ALPHA-T40D ALPHA-T46D ALPHA-T50D ALPHA-45D ALPHA-50D ALPHA-61D E Free Speed (approx.) rpm 3,900 6,000 5,000 6,000 7,000 7,000 C I F Torque Range (approx.) Nm ft-lbs 3.5~6.2 6~10 10~16 13~20 18~28 22~35 2.6~4.6 4.3~7.2 7.2~12 9.6~14.7 13~20 16~25 All Tools Standard with 1/4” Quick Change Chuck.
BATTERY SCREWDRIVERS UBP/T CORDLESS SERIES UBP-TL7 UBP-T7 9.6V S P E Model Free Speed (approx.) rpm UBP-TL7 UBP-T7 2,200 2,200 C I F Torque Range (approx.) Nm ft-lbs 4.9~9.8 7.8~21 3.6~7.2 5.5~15.5 I C Overall Length (approx.) mm in 241 241 9.4 9.4 A T Weight less Socket (approx.) lb kg 3.9 3.9 1.8 1.8 I O N S Noise Level dB(A) Sq.
A I M C O SCREWFEEDING AND FASTENING SYSTEMS A-50 Screw Presenters A-50 Robotic Screw Presenters Acra-Feed® Automatic Screwfeeders AIM/Janome Desktop Fastening Systems 21 24 25 26
A-50 SERIES SCREW PRESENTERS ACRA-FEED ® A-50 SERIES SCREWFEEDERS
A-50 SERIES AIMCO’s A-50 series screwfeeders offer the latest technology in table-top feeder design. This system provides an easy, first step in adding automation to your assembly process. Delivery and presentation of screws can now be accomplished on time, every time, for high volume assembly. ● Easy Interchangeability The A-50 units are modular! A simple rail change and readjustment is all that’s necessary to change a unit for use with a variety of screw sizes.
Using an A-50 is as simple as one, two, three… The A-50 Hopper has been designed to be easily loaded and gently oscillates the fasteners for optimal feed rate. The hopper is sized to accomodate a large number of fasteners (1200 of a #4 screw). One piece, easy change rail packages to suit a wide range of screw sizes Load screws into the hopper. There is no particular side to load unit and no gates to limit capacity. Address screw with magnetized bit. S P E C I F I C AT I O N S Max Nominal Screw Size 1.
A-50 ROBOTIC SCREW PRESENTERS ® A-50 ROBOTIC SERIES SCREWFEEDERS AIMCO’s Robotic Style A-50 series screwfeeders offer the latest technology in table-top feeder design. The feed mechanism allows for accurate and reliable placement of fasteners for robotic or vacuum pickup. Delivery and presentation of screws can now be precisely accomplished on time, every time, for high volume assembly.
ACRA-FEED® SCREWFEEDERS ® AUTOMATIC SCREWFEEDERS DESIGNED FOR MODERN, HIGH SPEED PRODUCTION ASSEMBLY LINES. The Acra-Feed® automatic screwfeeding system delivers your fastener directly to the driving tool, eliminating manual handling and placement of the fasteners. What better combination of benefits than higher output, less fatigue, no waste, and low cost. All of this – and more – is available when you install the Acra-Feed on your production line.
AIM/JANOME DESKTOP FASTENING SYSTEMS AIM/JANOME DESKTOP FASTENING SYSTEM It’s as easy as X, Y, Z ... On today’s assembly line, you not only must increase productivity to be competitive, but ensure that ergonomic, reliability and quality requirements are met! Solutions for solving the demands placed on today's fastening applications can be found in the AIM/Janome Desktop Fastening System. ● Increase productivity through fastening efficiency and reliability.
J R 5 0 0 & J R 7 5 0 FA S T E N I N G S Y S T E M S The JR500 and 750 Series Robots are designed for minimum space and maximum performance and offer many advanced features: ● Easy teaching pad with a digital display for programming and detailed self-diagnostic messages. ● Reliable quality-control feedback functions to ensure quality fastening. ● A large memory capacity with each memory card allowing up to 10 programs with 2,000 fastening points total.
A I M C O TORQUE MEASUREMENT EQUIPMENT UET Electronic Torque Testers TorqueStar Torque Analyzers ToolStar Joint Analyzers CheckStar Rotary Transducers Transducers and Joint Simulators Electronic Transducerized Wrenches Programmable Fastening Counters 29 30 32 34 36 38 40
UET ELECTRONIC TORQUE TESTERS AIMCO UET SERIES Electronic Torque Testers The UET Torque Tester Series from AIMCO provides “state-ofthe-art” technology for your quality requirements. It’s durable and portable design is ideal for a variety of applications in light assembly and can be used to test hand tools, power tools and even pulse tools.
TORQUESTAR TORQUE ANALYZERS TORQUESTAR TORQUE ANALYZERS AND DATA COLLECTORS Features include: ● The Version 4 TorqueStar Series of Torque Analyzers and Data Collectors are state-of-the-art instruments for measuring, monitoring and recording torque. Designed to facilitate torque testing before, during or after assembly, these instruments provide solutions for most torque auditing applications in manufacturing and quality departments.
SPECIFICATIONS ● ● ● ● ● ● ● ● ● ● ● A/D accuracy + 0.
TOOLSTAR JOINT ANALYZERS TOOLSTAR POWER TOOL AND ASSEMBLY JOINT ANALYZER The ToolStar instrument is designed to analyze and evaluate fasteners, assembly tools and bolted joints to ensure quality manufacturing. It is an ideal research and development instrument for measuring fastener or tool performance and joint analysis. The ToolStar will process stored data to define fastener or tool performance and assist technicians in understanding joint characteristics.
SPECIFICATIONS ToolStar Part #UTA-444-V-0 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Selectable A/D converter speed for plotting Sample rate - 8 Khz Menu prompting backlit LCD Supertwist 240 x 128 pixels, 4 3/4” x 2 1/2” Zoom facility provides over 20:1 magnification Selectable Frequency Response from 361 to 6000 Hz Auto zero Serial baud rate selectable from 300 to 19,600 Keypad with 29 tactile keys and 5 soft keys Printer is dot matrix, 144 dots per line Clock is 24 hour in European or US format Durable cast aluminu
CHECKSTAR ROTARY TRANSDUCERS CHECKSTAR ROTARY TORQUE TRANSDUCERS Features include: ● The CheckStar Rotary Torque Transducers accurately measure dynamic torque of power tools, including pulse tools. They provide a means of verifying torque or torque/angle output of multiple or single spindle controlled tools, allowing on-line quality assurance of your assembly process. CheckStar transducers have a patented slip ring and brush design which eliminates “brush bounce” providing confidence in torque readings.
SPECIFICATIONS ● ● ● ● ● ● ● ● ● ● Accuracy Zero Drift Overload Capacity Operating Temperature Case Rating Drag Friction Angle Measurement Square Drives Heavy Duty Coil Cable Warranty Drive Size 1/4” Hex 1/4” Hex 1/4” Hex 1/4” Hex 1/4” Sq 1/4” Sq 3/8” Sq 3/8” Sq 1/2” Sq 3/4” Sq 3/4” Sq 1” Sq 1” Sq Drive Better than +/- 1% FSD Better than +/- .1% FSD per degree Celsius 125% FSD 5 - 40 degrees Celsius IP40 Less than .1% rated torque or .
TRANSDUCERS AND JOINT SIMULATORS STATIONARY TRANSDUCERS AND JOINT SIMULATORS The Crane Stationary Transducers and Joint Simulators provide quick and easy torque testing, verifying and calibrating of hand torque tools and power tools. Features include: ● There are two groups of stationary transducers - Industrial and Metrology. The Metrology group of transducers have very high accuracy and are used explicitly in torque metrology labs.
SPECIFICATIONS ● Accuracy ● Zero Drift Overload Capacity Operating Temperature Square Drives Warranty ● ● ● ● F A B C A G B D Better than +/- 1% FSD Industrial Stationary td Better than +/- .25% Indicated Metrology Stationary td Less than .
ELECTRONIC TRANSDUCERIZED WRENCHES ELECTRONIC TRANSDUCERIZED WRENCHES Features include: ● ● The Crane Transducerized Wrenches are designed for residual torque auditing and general purpose precision torquing. They provide the user with torque readings that are not subjective to ensure accuracy and confidence in your audit process. ● ● ● These transducerized wrenches are available in two styles: Industry Standard (IS) and UTA styles.
SPECIFICATIONS ● ● ● ● ● ● Accuracy Zero Drift Overload Capacity Operating Temperature Square Drives Warranty Better than +/- 1% FSD Less than .1% rated torque per degree Celsius 140% FSD 5 - 40 degrees Celsius Designed to fit ANSI, BS and DIN square standards 12 months parts and labor on manufacturing defects O /A C B Ball retainer all sizes SQ. A/F To UTA Readout or TorqueStar Drive Size 1/4” Head Dia.
PROGRAMMABLE FASTENING COUNTERS AIMCO PROGRAMMABLE FASTENING COUNTERS Eliminate missing or untightened fasteners during assembly Daily distractions for an assembly line operator can easily create missing or untightened fasteners. Unchecked, these quality defects can create costly problems. AIMCO’s line of programmable fastening counters allow you to eliminate the problem before it leaves the workstation.
A I M C O ACCESSORIES Balancers, Retractors & Hose Reels Ergo-Arm® Tool Support Arms Workstation Components & Assemblies Air Hose, Swivels & Inline Filter/Reg’s Ergonomic Twist Plugs Mag-O-Nets® Bits and Nutsetters 42 45 47 49 50 51 52
BALANCERS, RETRACTORS & HOSE REELS A I M C O Balancers and Tool Support Systems
RETRACTORS RPA SERIES ■ ■ ■ ■ ■ ■ ■ ■ ■ 1 3/16” Lightweight and compact No tools needed for setting of tension User friendly 5 ft. nylon coated steel cable Reinforced hanging bracket includes provision for safety cable Adjustable cable stop Non-repairable 3 models support weight 0.5-5 lbs.
ZERO GRAVITY BALANCERS AA The “TRUE” balancers CC TW-O and TW-OO BB ■ Zero gravity / true balance ■ No tension build-up to cause worker fatigue ■ Easy external direct drive tensioning ■ Lightweight construction ■ 360 degree upper swivel ■ 3.3 ft. aircraft stranded steel cable 1/8” diameter (TW-OO cable length 18”) ■ Provision for safety cable ■ Tool clip included DD EE MODEL TW-3 through TW-15 ■ Four models supporting weights from 2.2 lbs. to 33 lbs.
ERGO-ARM® TOOL SUPPORT ARMS ® ERGO-ARM TOOL SUPPORT SYSTEMS Reduce operator fatigue and increase productivity with the ERGO-ARM® ergonomic tool support system series. AD-D1098-PL PRECISION LINEAR ARM ■ Tracks perpendicular to workpiece on ■ For use with pneumatic and three moving axis (X,Y,Z) to provide maximum mobility and ease of movement.
® CLEAN ROOM ERGO-ARM ■ Blue anodized aluminum finish ■ No metal-to-metal joints to create particle count ■ 2-piece hinged forearm allows more freedom of movement in the assembly process ■ Telescoping reach from end of forearm allows easy adjustment in 1-inch increments ■ Arm achieves neutral buoyancy - will not spring away from operator when released ■ Resistance can be set to suit individual operator preference ■ Reduce operator fatigue ■ Provide consistency and accuracy for repetitive assembly tas
WORKSTATION COMPONENTS AND ASSEMBLIES WORKSTATION COMPONENTS AND ASSEMBLIES BALANCER TROLLEY: ABT-3/5 COMPONENTS TRACK Used both for vertical and horizontal supports Beige polyester finish Part Number 30# Track AT3-3 AT3-4 AT3-6 AT3-9 3 ft track 4 ft track 6 ft track 9 ft track Part Number 50# Track AT5-3 AT5-4 AT5-6 AT5-9 AT5-12 3 ft track 4 ft track 6 ft track 9 ft track 12 ft track 1.
AW3FMS Floor mounted 3 ft swinging jib AW3FMF Floor mounted 3 ft fixed jib Maximum weight 30 lbs Column height: 6 ft AW3FMS AW3FMF AW6FMS AW6FMF AW6FMS Floor mounted 6 ft swinging jib AW6FMF Floor mounted 6 ft fixed jib Maximum weight 50 lbs Column height: 9 ft All floor mounted units include: end stop, balancer trolley and intermediate carrier AIMCO TOOL SUPPORT ARMS BENCH MOUNTED WORKSTATION: JJ-30-S ■ 30 lbs. maximum weight ■ 48” column height including mounting plate ■ 3 ft.
AIR HOSE, SWIVELS & INLINE FILTER/REG’S Additional AIMCO Accessories AIMCO SINGLE AIR HOSE ■ ■ ■ ■ ■ ■ Durable Polyurethane Hose Excellent Recoil Memory Maximum Flexibility and Lightweight Transparent Hose Color (opaque available) Custom Colors Available High Chemical Resistance ‘RL’ (Retracted Length) 16” TAIL COIL ID 8” TAIL SINGLE AIR HOSE ASSEMBLIES (COILED) Part Number Description Retracted Fittings Working Pressure 100PSI (OD x ID x length) Length SINGLE AIR HOSE (COILED) CUSTOM Part Number De
ERGONOMIC TWIST PLUGS AIMCO ERGONOMIC TWIST PLUGS These unique, ergonomically designed hose fittings provide 360° rotation and 45° angled rotation in any direction.
MAG-O-NETS® AIMCO MAG-O-NETS A revolutionary way to convert standard bits to magnetic bits. AIMCO Mag-O-Nets, available in commonly used sizes, easily slide onto virtually any standard screwdriver bit turning it into a magnetized bit. These magnetic collars are an easy, cost effective alternate to the traditional magnetic bit holder and insert bit combination. The “wobble” effect typically experienced with the bit holder is eliminated and thus improves torque transfer onto the application.
BITS AND NUT SETTERS
BITS AND NUT SETTERS Encajes de Apretamiento AIMCO has assembled the most complete package of commonly used screwdriver bits and nut setters in the industry. Our goal is to supply you with the highest quality bits and nut setters for all your fastener needs. If you’re in the electronics, aerospace or general industry, AIMCO has the bits and nut setters to fit your needs. Most items are available in both American and Japanese industrial standards to properly fit your fasteners.
PHILLIPS POWER BITS ® Puntas Phillips® L Part No. A3S0-2 A3S1-2 A3S1-2.75 A3S1-3 A3S1-3.5 A3S1-4 A3S1-6 A3S2-1.2 A3S2-1.6 A3S2-2 A3S2-2.75 A3S2-3 A3S2-3.5 A3S2-4 A3S2-4.7 A3S2-4.75 A3S2-6 A3S2-8 A3S2-10 A3S2-12 A3S3-2 A3S3-2.75 A3S3-3 A3S3-3.5 A3S3-4 A3S3-4.7 A3S3-6 A3S3-8 A3S3-10 A3S3-12 Point Size mm Length in 0 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 50 50 70 75 90 100 150 30 40 50 70 75 90 100 120 125 150 200 250 300 50 70 75 90 100 120 150 200 250 300 1.969 1.969 2.756 2.
PHILLIPS POWER BITS DOUBLE ENDED ® Puntas de Doble Punta Part No. L 12 Point Size mm in 1 1 2 2 2 2 2 2 2 3 3 3 3 3 75 100 50 75 100 150 200 250 300 50 75 100 150 200 2.935 3.938 1.968 2.935 3.938 5.906 7.874 9.842 11.811 1.968 2.935 3.938 5.906 7.874 Point Size mm in A38S0-1 A38S1-1 A38S1-1.5 A38S1-2 A38S2-1 A38S2-1.5 A38S2-2 A38S2-2.5 A38S3-1 A38S4-1 A38S4-1.25 0 1 1 1 2 2 2 2 3 4 4 25 25 38 50 25 38 50 65 25 25 30 0.984 0.984 1.496 1.969 0.984 1.496 1.969 2.559 0.984 0.984 1.181 Part No.
ACR PHILLIPS POWER BITS ® Puntas Phillips® L Part No. A3S1-2ACRI A3S1-2.75ACRI A3S1-3.5ACRI A3S1-6ACRI A3S2-2ACRI A3S2-2.75ACRI A3S2-3.5ACRI A3S2-6ACRI A3S3-2ACRI A3S3-2.75ACRI A3S3-3.5ACRI A3S3-6ACRI Point Size mm Length in 1 1 1 1 2 2 2 2 3 3 3 3 50 70 90 150 50 70 90 150 50 70 90 150 1.969 2.756 3.543 5.906 1.969 2.756 3.543 5.906 1.969 2.756 3.543 5.906 Point Size mm in 1 1 1 2 2 2 2 3 3 3 3 50 87.5 150 50 70 90 150 50 70 90 150 1.969 3.445 5.906 1.969 2.756 3.543 5.906 1.969 2.756 3.
ACR PHILLIPS INSERT BITS ® Insertos Phillips® Part No. L A38S1-1ACRI A38S2-1ACRI A38S3-1ACRI Point Size mm Length in 1 2 3 25.4 25 25.4 1.000 0.984 1.000 Point Size mm in 1 2 3 25 25 25 0.984 0.984 0.984 Point Size mm in 1 2 3 25.4 25.4 25.4 1.000 1.000 1.000 ACRI = INSTALL Part No. A38S1-1ACR A38S2-1ACR A38S3-1ACR Length ACR = REMOVE Part No. A38S1-1ACRB A38S2-1ACRB A38S3-1ACRB Length ACRB = BOTH INSTALL AND REMOVE Reduced Diameter ® Insertos Phillips L Part No.
SLOTTED POWER BITS Puntas Agujereadas Screw Size mm in Blade Thickness Blade Width A3M8-2 A3M8-2.75 A3M8-3 A3M10-2 A3M10-2.75 A3M10-3 A3M12-2 A3M12-2.75 A3M12-3 8 8 8 10 10 10 12 12 12 50 70 75 50 70 75 50 70 75 1.969 2.756 2.953 1.969 2.756 2.953 1.969 2.756 2.953 .042 .042 .042 .046 .046 .046 .050 .050 .050 0.275 0.275 0.275 0.312 0.312 0.312 0.360 0.360 0.360 Reduced Diameter Part No.
SLOTTED INSERT BITS Insertos Ranurados Part No. L A38M2-1 A38M2-1.5 A38M3-1 A38M3-1.5 A38M4-1 A38M4-1.5 A38M5-1 A38M6-1 A38M6-1.5 A38M8-1 A38M8-1.5 A38M10-1 A38M10-1.5 A38M12-1.5 A38M14-1.5 TORX POWER BITS Part No. ® Puntas Torx® L For additional Torx Power Bits see pg. 63 A3T6-2 A3T7-2 A3T7-2.75 A3T7-3.5 A3T7-6 A3T8-2 A3T8-2.75 A3T8-3.5 A3T8-6 A3T9-2 A3T9-2.75 A3T9-3.5 A3T9-6 A3T10-2 A3T10-2.75 A3T10-3.
TORX POWER BITS ® Puntas Torx® L TAMPER RESISTANT Torx® (Extra Resistencia) L Part No. Torx Size mm in A3T15-2 A3T15-2.75 A3T15-3.5 A3T15-6 A3T20-2 A3T20-2.75 A3T20-3.5 A3T20-6 A3T25-2 A3T25-2.75 A3T25-3.5 A3T25-6 A3T27-2 A3T27-2.75 A3T27-3.5 A3T27-6 A3T30-2 A3T30-2.75 A3T30-3.5 A3T30-6 A3T40-2 A3T40-2.75 A3T40-3.5 A3T40-6 T15 T15 T15 T15 T20 T20 T20 T20 T25 T25 T25 T25 T27 T27 T27 T27 T30 T30 T30 T30 T40 T40 T40 T40 50 70 90 150 50 70 90 150 50 70 90 150 50 70 90 150 50 70 90 150 50 70 90 150 1.
TORX INSERT BITS ® Insertos Torx® L Part No. A38T6-1 A38T7-1 A38T8-1 A38T9-1 A38T10-1 A38T15-1 A38T20-1 A38T25-1 A38T27-1 A38T30-1 A38T40-1 TAMPER RESISTANT Torx® (Extra Resistencia) L Part No. A38T7-1TR A38T8-1TR A38T9-1TR A38T10-1TR A38T15-1TR A38T20-1TR A38T25-1TR A38T27-1TR A38T30-1TR A38T40-1TR Torx Size mm in T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40 25 25 25 25 25 25 25 25 25 25 25 0.984 0.984 0.984 0.984 0.984 0.984 0.984 0.984 0.984 0.984 0.
POZIDRIV POWER BITS ® Puntas Pozidriv® Part No. L ACR® TYPE ACR® L Point Size mm in A3S1-2PZ A3S1-2.75PZ A3S1-3.5PZ A3S2-2PZ A3S2-2.75PZ A3S2-3.5PZ A3S3-2PZ A3S3-2.75PZ 1 1 1 2 2 2 3 3 50 70 88.9 50 70 88.9 50 70 1.969 2.756 3.500 1.969 2.756 3.500 1.969 2.756 Part No. Point Size mm in 2 50 1.969 Point Size mm in A38S1-1PZ A38S2-1PZ 1 2 25 25 0.984 0.984 Part No. Point Size mm in 1 2 3 25.4 25.4 25.4 1.000 1.000 1.000 Point Size mm in 1 2 25 25 0.984 0.
SUPADRIV POWER BITS ® Puntas Supadriv® Part No. Point Size mm in 1 2 3 50 50 50 1.969 1.969 1.969 Point Size mm in A38S1-1SDV A38S2-1SDV 1 2 25 25 0.984 0.984 Reduced Diameter Part No. Point Size mm in Insertos Ranurados Con Diametro Reducido A39S2-1SDV 2 25 0.984 L A3S1-2SDV A3S2-2SDV A3S3-2SDV Length SUPADRIV INSERT BITS ® Insertos Supadriv® L Part No. Length Length L Supadriv® is a registered trademark of European Industrial Services (Fasteners) Limited.
ALLEN DRIVE POWER BITS Puntas Socket Cabeza Allen L Part No. A3C1/16-2 A3C5/64-2 A3C3/32-2 A3C7/64-2 A3C1/8-2 A3C9/64-2 A3C5/32-2 A3C3/16-2 A3C7/32-2 A3C1/4-2 A3C5/16-2 1/16” 5/64” 3/32” 7/64” 1/8” 9/64” 5/32” 3/16” 7/32” 1/4” 5/16” Part No. Hex A3C2-2 A3C2.5-2 A3C3-2 A3C4-2 A3C5-2 A3C6-2 A3C8-2 A3C10-2 7/16”HEX SHANK Puntas 7/16 L Hex Part No. A7C5-3.5 A7C6-3.5 A7C8-3.5 A7C10-3.5 2 mm 2.5 mm 3 mm 4 mm 5 mm 6 mm 8 mm 10 mm Length mm in 50 50 50 50 50 50 50 50 50 50 50 1.969 1.969 1.969 1.
ALLEN HEAD INSERT BITS Insertos Cabeza Allen L Part No. Hex A38C1/16-1 A38C5/64-1 A38C3/32-1 A38C7/64-1 A38C1/8-1 A38C9/64-1 A38C5/32-1 A38C5/32 -2 A38C3/16-1 A38C3/16-2 A38C7/32-1 A38C7/32-2 A38C1/4 -1 A38C1/4-2 A38C5/16-1 A38C3/8-1 1/16” 5/64” 3/32” 7/64” 1/8” 9/64” 5/32” 5/32” 3/16” 3/16” 7/32” 7/32” 1/4” 1/4” 5/16” 3/8” Part No. Hex A38C1.5-1 A38C2-1 A38C2.5-1 A38C3-1 A38C4-1 A38C4-2 A38C5-1 A38C5-2 A38C6-1 A38C6-2 A38C7-1 A38C7-2 A38C8-1 A38C8-1.25 1.5 mm 2 mm 2.
SQUARE RECESS POWER BITS Puntas Cuadradas (Macho) Reduced Diameter Puntas Cuadradas Con Diametro Reducido L Part No. Nominal Square Size mm in 1/16” 1/16” 1/16” 3/32” 3/32” 3/32” 1/8” 1/8” 1/8” 9/64” 9/64” 9/64” 50 70 90 50 70 90 50 70 90 50 70 90 1.969 2.756 3.543 1.969 2.756 3.543 1.969 2.756 3.543 1.969 2.756 3.543 Nominal Square Size mm in A3R1/16-2 A3R1/16-2.75 A3R3/32-2 A3R3/32-2.75 A3R1/8-2 A3R1/8-2.75 A3R9/64-2 A3R9/64-2.
TORQ-SET POWER BITS ® Puntas Torq-Set® L Part No. A3TS 1/4-1.25 A3TS 5/16-1.25 A3TS 3/8-1.25 A3TS 7/16-1.25 A3TS 1/2-1.25 A3TS0-1.25 A3TS0-2 A3TS0-3.5 A3TS0-6 A3TS1-1.25 A3TS1-2 A3TS1-3.5 A3TS1-6 A3TS2-1.25 A3TS2-2 A3TS2-3.5 A3TS2-6 A3TS3-1.25 A3TS3-2 A3TS3-3.5 A3TS3-6 A3TS4-1.25 A3TS4-2 A3TS4-3.5 A3TS4-6 A3TS5-1.25 A3TS5-2 A3TS5-3.5 A3TS5-6 A3TS6-1.25 A3TS6-2 A3TS6-3.5 A3TS6-6 A3TS8-1.25 A3TS8-2 A3TS8-3.5 A3TS8-6 A3TS10-1.25 A3TS10-2 A3TS10-3.
TORQ-SET ACR POWER BITS ® ® Puntas Torq-Set® ACR® Part No. L Screw Size mm in 6 8 31 31 1.220 1.220 Screw Size mm in A38TS 1/4-1 A38TS 5/16-1 A38TS0-1 A38TS1-1 A38TS2-1 A38TS3-1 A38TS4-1 A38TS5-1 A38TS6-1 A38TS8-1 A38TS10-1 1/4 5/16 0 1 2 3 4 5 6 8 10 25 25 25 25 25 25 25 25 25 25 25 0.984 0.984 0.984 0.984 0.984 0.984 0.984 0.984 0.984 0.984 0.984 Part No. Screw Size mm in 6 8 10 25 25 25 0.984 0.984 0.984 A3TS6-1.25ACR A3TS8-1.
TRI-WING POWER BITS ® Puntas Tri-Wing® Part No. L ® ACR TYPE Recess # mm in Tension Head Shear Head A3TW0-1.25 A3TW1-1.25 A3TW2-1.25 A3TW3-1.25 A3TW4-1.25 A3TW5-1.25 A3TW6-1.25 A3TW7-1.25 A3TW8-1.25 0 1 2 3 4 5 6 7 8 31 31 31 31 31 31 31 31 31 1.220 1.220 1.220 1.220 1.220 1.220 1.220 1.220 1.220 0-80 2-56 4-40 6-32 8-32 10-32 1/4-28 1/4-28 3/8-24 4-40 6-32 8-32 10-32 1/4-32 5/16-24 5/16-24 7/16-20 Part No. Recess # mm in Tension Head Shear Head 3 4 5 6 31 31 31 31 1.220 1.220 1.
ELECTRIC BITS Puntas Electricas Part No. L A00X4X40 A00X4X60 A0X4X40 A0X4X80 A1X4X40 A2X4X40 4 mm Point Size mm Length in 00 00 0 0 1 2 40 60 40 80 40 40 1.754 2.362 1.754 3.149 1.754 1.754 Point Size mm in 0 0 1 1 2 2 31 70 31 70 31 70 1.22 2.755 1.222 2.755 1.22 2.755 4 mm Part No. A26S0-1.25 A26S0-2.75 A26S1-1.25 A26S1-2.75 A26S2-1.25 A26S2-2.75 L 1.8 mm Part No. L A26M2-1.25 A26M3-1.25 1.8 mm Part No. L 1.8 mm H A26C1.5-2 A26C2-2 A26C2.
NUT SETTERS Encajes para Destornillador Part No. Hex L H A3B1/4-2 A3B1/4-2.5 A3B5/16-2 A3B5/16-2.5 A3B3/8-2 A3B3/8-2.5 A3B05-2.75 A3B55-1.2 A3B55-2.75 A3B55-4 A3B06-2.75 A3B07-1.2 A3B07-2 A3B07-2.75 A3B07-4 A3B08-1.2 A3B08-2 A3B08-2.75 A3B08-4 A3B08-6 A3B08-8 A3B09-2.75 A3B09-4 A3B10-1.2 A3B10-2 A3B10-2.75 A3B10-4 A3B10-6 A3B10-8 A3B11-2.75 A3B11-4 A3B12-1.2 A3B12-2 A3B12-2.75 A3B12-4 A3B12-6 A3B12-8 A3B13-2.75 A3B13-4 A3B14-2.75 A3B14-4 A3B14-6 A3B16-2.75 A3B17-2.
MAGNETIC NUT SETTERS Encajes Magneticos MP Type Encajes Magneticos (MP) a Presion L H Magnet MS Type Encajes Magneticos (MS) Modelo Deslizante H L Sliding Magnet MT Type Encajes Magneticos (MT) Modelo Tubular H L Tube Magnet Part No. A3BMP1/4-2 A3BMP1/4-2.5 A3BMP5/16-2 A3BMP5/16-2.5 A3BMP3/8-2 A3BMP3/8-2.5 A3BMP55-2.75 A3BMP55-4 A3BMP06-2.75 A3BMP06-4 A3BMP07-2 A3BMP07-2.75 A3BMP07-4 A3BMP08-2 A3BMP08-2.75 A3BMP08-4 A3BMP10-2 A3BMP10-2.75 A3BMP10-4 A3BMP12-2 A3BMP12-2.75 A3BMP12-4 A3BMP14-2.
UNIVERSAL NUT SETTERS Encajes para Destornillador Universales L H Part No. A3BU08-4 A3BU08-6 A3BU08-8 A3BU10-4 A3BU10-6 A3BU10-8 A3BU12-4 A3BU12-6 A3BU12-8 A3BU14-4 A3BU14-6 A3BU14-8 Hex Length mm in 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 14 mm 14 mm 14 mm 100 150 200 100 150 200 100 150 200 100 150 200 3.937 5.906 7.874 3.937 5.906 7.874 3.937 5.906 7.874 3.937 5.906 7.874 Inner Diameter (ID) Outer Diameter (OD) Length mm 7mm 6mm 3/16 19mm 17.5 17.
BIT ADAPTERS Adaptadores Sq Part No. Square Drive H A3S02A-1.375 A3S02A-2 A3S02A-3 A3S02A-4 A3S02A-5 A3S02A-6 A3S02A-8 A3S02A-10 A3S02A-12 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” A3S03A-2 A3S03A-3 A3S03A-4 A3S03A-6 A3S03A-8 L H in 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 35 50 75 100 128 150 200 250 300 1.378 1.969 2.953 3.937 5.039 5.906 7.874 9.843 11.811 3/8” 3/8” 3/8” 3/8” 3/8” 1/4” 1/4” 1/4” 1/4” 1/4” 50 75 100 150 200 1.969 2.953 3.937 5.906 7.874 Square Drive H A703A-1.
TORX ® SOCKETS Sockets Torx® T Type Part No. Macho A325TT A327TT A330TT A340TT A345TT A350TT Sq. A Square Drive Torx Size A mm mm D in Length mm in 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 25TT 27TT 30TT 40TT 45TT 50TT 4.4 5.0 5.5 6.6 7.8 8.8 20 20 20 20 20 20 0.787 0.787 0.787 0.787 0.787 0.787 Square Drive Torx Size A mm mm in 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 30TT 40TT 45TT 50TT 55TT 60TT 5.5 6.6 7.8 8.8 11.2 13.2 25 25 25 25 25 25 0.984 0.984 0.984 0.984 0.984 0.984 70 70 70 70 70 70 2.
ALLEN SOCKETS Socket Cabeza Allen Part No. L L1 Sq. H Part No. L L1 Sq. H A305C-2.3 A305C-3.5 A306C-2.3 A306C-3.5 A308C-2.3 A308C-3.5 A310C-2.3 A310C-3.5 Part No. L L1 H A31/4C A35/16C A33/8C A37/16C A31/2C A304C A305C A306C A308C A310C A312C A314C Sq. Extensions and sockets are supplied standard with steel pin and rubber O-Ring. Steel O-Rings are available upon request at no extra charge. For additional Allen Sockets see pg.
A I M C O REFERENCE MATERIAL
CONVERSION CHART Tabla de Conversión Torque Conversion Factors Units to be Converted 1 ozf-in 1 lbf-in 1 lbf-ft 1 gf-cm 1 kgf-cm 1 kgf-m 1 mN-m 1 cN-m 1 N-m = = = = = = = = = ozf-in IMPERIAL lbf-in 1 16 192 0.014 13.89 1389 0.142 1.42 141.6 0.0625 1 12 0.0009 0.868 86.8 0.009 0.088 8.851 Factores de Conversion de Torque lbf-ft gf-cm METRIC kgf-cm Kfg-m 0.005 0.083 1 0.00 07 0.072 7.233 0.0007 0.007 0.738 72 1152.1 13 826 1 1000 100 000 10.2 102 10 197 0.072 1.152 13.83 0.001 1 100 0.01 0.
CONVERSION CHART Tabla de Conversión Thread Size to Hex Size Thread - A/F size M2 M 2.3 M 2.6 M3 M 3.5 M4 M5 (M 5-6) M6 M7 M8 (M 8) M 10 (M 10) M 12 (M 12) M 14 (M 14) M 16 M 18 M 20 (M 22) M 22 M 24 mm 4 4.5 5 5.
REFERENCE MATERIAL Material de Referencia Retaining Pins and Rings Square Drive 3/8” 1/2” 1/2” 5/8” 3/4” 3/4” 3/4” 1” 1” 1” 1 1/4” 1 1/4” 1 1/2” 1 1/2” 1 3/4” Pin Part No. Size S-1 S-2 S-3 S-4 S-5 S-6 S-7 S-8 S-9 S-10 S-11 S-12 S-13 S-14 S-15 øxL 3 x 17 mm 3.5 x 22 mm 3.5 x 25 mm 4.5 x 31 mm 5 x 34 mm 5 x 38 mm 5 x 45 mm 6 x 45 mm 6 x 50 mm 6 x 55 mm 6 x 55 mm 6 x 63 mm 8 x 72 mm 8 x 83 mm 10 x 106 mm Steel Ring Part No. Size øA x øB 1 x 18 mm 1.2 x 23 mm 1.2 x 25 mm F-1 F-2 F-3 ——— F-4 F-5 1.
Monitoring the fastening process Techsystem Monitor dokręcania AIMCO Opis www.techsystem.pl www.aimco-global.
Monitoring the fastening process System ATM W skład systemu wchodzi: • • • Jednostka bazowa – ATM-1-1 Przewód, przetwornik i zawór nadmiarowy Oprogramowanie PC i interfejsy do komunikacji www.techsystem.pl www.aimco-global.
Monitoring the fastening process Zalety systemu • ¾ ¾ ¾ • • • • ¾ Weryfikacja procesu wkręcania Sygnalizacja końca procesu Sygnalizacja podwójnego impulsu Sygnalizacja zatarcia gwintu Zliczanie cykli Łatwe programowanie funkcji AutoCal Dostęp do komunikacji sieciowej I/O interfejs Łatwa integracja z PLC, PC, sygnalizacją świetlną, selektorem nasadek itp. www.techsystem.pl www.aimco-global.
Monitoring the fastening process Opis możliwości · Możliwość odrzucenia ograniczeń nałożonych przez system – wiedząc, że proces dokręcania jest zakończony poprawnie · Możliwość pracy z narzędziami impulsowymi Uryu ULT TM Sygnalizacja podwójnego uderzenia i przedwczesnego zwolnienia spustu Auto-Cal – automatyczne generowanie parametrów dla danego procesu wkręcania – proste programowanie 6 wskaźników LED sygnalizujących stan procesu wkręcania OK, NOK, „dokręcanie w toku” 8 możliwych do wyboru programów dl
Monitoring the fastening process Opis możliwości • • • • • • Zliczanie serii widoczne na wyświetlaczu Zliczanie cykli widoczne na wyświetlaczu dla danej serii Sygnalizacja dźwiękowa dla cyklu OK. i NOK. 5 izolowanych wejść i 8 wyjść dla sterownika PLC Parametry widoczne na wyświetlaczu podczas cyklu wkręcania Możliwość podłączenia programatora lub klawiatury PC dla ułatwienia obsługi www.techsystem.pl www.aimco-global.
Monitoring the fastening process Opis możliwości • • • • • Przełącznik elektryczny z kluczem dla trybu programowania i trybu zabezpieczenia dostępu Możliwość podłączenia interfejsów sieciowych Pamięć ostatniego cyklu dla zdiagnozowania i usunięcia błędu Pamięć ostatnich 1000 cykli Możliwość użycia programatora lub oprogramowania PC www.techsystem.pl www.aimco-global.
Monitoring the fastening process Skrócona instrukcja obsługi Aby uruchomić funkcję AutoCal musimy wykonać następujące kroki.
Monitoring the fastening process Skrócona instrukcja obsługi • • • • • Nacisnąć przycisk MODE dopóki nie pojawi się (X).BAT na wyświetlaczu Wcisnąć SET aby wyświetlić liczbę cykli w serii Naciskać UP lub DOWN aby ustawić właściwą wartość Wcisnąć SET aby zaakceptować nową wartość Przekręć klucz w pozycje LOCK www.techsystem.pl www.aimco-global.
Monitoring the fastening process Oprogramowanie PC • Podgląd bieżących parametrów • Edycja parametrów • Ustawianie hasła • Możliwość ustawienia użytkowników o różnym poziomie dostępu • Ustawianie daty i czasu • Menu historii zdarzeń • Menu rozwiązywania problemów www.techsystem.pl www.aimco-global.
Monitoring the fastening process Interfejsy sieciowe 4 PFCS – Chrysler Interface 8 RS232 8 Ethernet 4 Coss – GM DeviseNet Interface 4 Generic DeviseNet Interface www.techsystem.pl www.aimco-global.
Monitoring the fastening process Dlaczego AIMCO? • Potrzebujesz rejestracji błędów? • Potrzebujesz zliczania ilości cykli? • Potrzebujesz lżejszego, szybszego narzędzia? www.techsystem.pl www.aimco-global.
Monitoring the fastening process Dlaczego AIMCO? • AIMCO proponuje wszechstronne rozwiązania służące technice wkręcania • Narzędzia AIMCO są projektowane z uwzględnieniem światowych trendów w ergonomii • AIMCO posiada grupę profesjonalnych doradców z wieloletnim doświadczeniem w rozwiązywaniu problemów montażowych • AIMCO posiada grupę wykwalifikowanego i doświadczonego personelu, szkolącego pracowników serwisowych, aby Państwa narzędzia pozostawały w jak najlepszym stanie. www.techsystem.pl www.
Monitoring the fastening process Podsumowanie Dystrybutor systemu AcraDyne w Polsce: TECHSYSTEM Bielsko-Biała tel. 033 816 73 61 fax 033 816 73 62 mobil 602 269 638 info@techsystem.pl www.techsystem.pl www.aimco-global.