TC HUB Connected to MXL – EVO User manual
TC Hub connected to MXL and EVO User manual Release 1.01 INDEX Chapter 1 – Characteristics, part number and installation ........................................ 2 1.1 – Part number ........................................................................................................................ 2 1.2 – Installation .......................................................................................................................... 2 1.3 – Connection with MXL and EVO ............................
TC Hub connected to MXL and EVO User manual Release 1.01 0 Chapter 1 – Characteristics, part number and installation TC Hub is a thermocouples multiplier that can support up to four thermo couples (“K” type only) and cascade connection of more TH Hub is possible. It communicates through the CAN protocol increasing available channels without occupying any analog channel of the logger and minimizing wiring overall.
TC Hub connected to MXL and EVO User manual Release 1.01 1 Chapter 2 – Configuration on MXL – EVO At the very first installation, TC Hub is to be configured as MXL and/or EVO expansion using Race Studio 2 software. After this it will be automatically recognised at each network start. In this example TC Hub is connected to MXL Pro05. To configure TC Hub run Race Studio2 software, press “AIM System Manager” (1) and select the proper logger (2) as shown here below.
TC Hub connected to MXL and EVO User manual Release 1.01 In case of very first configuration the layer will show up empty, press “Add expansion” (or “Delete Expansion” to eliminate an expansion and then confirm the choice) and the window here below appears: Press “TC Hub” (1) and the fields below the images enables.
TC Hub connected to MXL and EVO User manual Release 1.01 10 2.1 – Configurations of MXL and EVO displays TC Hub channels can be shown on MXL display setting them in “System Configuration” layer as shown here below. TC Hub channels visualisation can be set like the visualisation of any other channel (see MXL user manual for further information). In the example here below TC Hub enabled channels to be shown are TC_1, TC_2 e TC_3. Each of them can be shown in a field of the display.
TC Hub connected to MXL and EVO User manual Release 1.01 When all parameters have been fixed and the field have been associated with the respective channel the configuration is to be transmitted to the logger. Just press “Transmit” button on Race Studio 2 top keyboard. When the configuration has been transmitted a confirmation message appears.
TC Hub connected to MXL and EVO User manual Release 1.01 2 7 Chapter 3 – Data visualisation and analysis 3.1 – Data visualisation on MXL TC Hub channels visualisation on MXL works exactly like the visualisation of any other MXL channel and display pages are scrolled pressing “Quit/VIEW”. Refer to MXL user manual for any further information. In the image here below Temperature channel sampled through TC Hub value is 70° and channel name is OIL T. Powering on MXL, TC Hub is automatically recognised.
TC Hub connected to MXL and EVO User manual Release 1.01 Appendix – Technical drawings Temperature Channel 4 GND n.c. Temperature Channel 3 GND n.c. Temperature Channel 2 GND n.c. Temperature Channel 1 GND n.c. Contr. da / Ckd. by 1 2 3 Position 4 Firma / Signature Position 3 1 2 3 1 2 3 1 2 3 3 pins female Binder connector pinout 1 2 3 93 123 TC Hub pinout CAN cable 1500 mm lenght Data / Date Position 2 N. rev. / Rev. N. Descrizione / Description Position 1 3 Rif. / Ref. Q.tà/Q.