User guide

• Set the correct input channels by double-clicking in the “Sensor type”

column.

• Click “Configuration” button and set the following parameters:

• Message language;

• Wheel circumference and pulses per wheel revolution;

• Shift light led;

• RPM multiply factor and RPM maximum value;

• Channels’ alarms;

• Speed, temperature and pressure unit of measure;

• Beacon receiver obscuring time and number of splits;

• Transmit the configuration to the instrument by pressing the “Transmit”

button.

• Calibrate/autocalibrate the sensors (potentiometers, accelerometer,

gyroscope and gear sensor).

• Transmit the calibration to the instrument by using button “Transmit

calibration”.