User guide

How to use MyChron 3 Plus/Gold/Gold XG

Viewing data per best lap time

• Press MEM/OK to see the best lap and the maximum RPM and

temperatures values.

• Press MEM/OK to see minimum RPM and temperatures values.

• Press VIEW to switch from RPM to speed.

• Press VIEW twice to return to main display mode.

Viewing other completed lap data

• Press MEM/OK.

• Press MENU/<< to view a previous lap or >> to view a following lap.

• Press VIEW to return to main display mode.

Configuration via software

• Install Race Studio 2 software (see “Software installation” paragraph).

• Connect the instrument to a “switched on” PC by using the USB cable.

• Switch on your MyChron 3 Plus/Gold/Gold XG and install the USB

drivers (see “Installing the USB drivers” paragraph).

• Start Race Studio 2.

• Select MyChron 3 Plus/Gold/Gold XG and click “Logger manager”

button.

• Set the correct values in the boxes of the “New configuration” dialog box.

• Click “Channels” button.