MXL Dash USER GUIDE AiM Srl. Via Cavalcanti, 8 20063 Cernusco S/N (MI) Italia Tel. (+39) 02.9290571 Made in Italy www.aim-sportline.
Thanks. MXL Dash Digital Display 04 GETTING STARTED 08 INSTALLATION AND CONNECTION MXL DASH 02 12 CONFIGURATION OF MXL DASH 14 BUTTONS AND FIELDS 18 DATA SHEET We would like to thank you for having chosen our MXL Dash, which we believe be the successful completion of the acquisition EVO4 data.
CHAPTER 1 MXL Dash kit includes.
GETTING STARTED CHAPTER 1 MXL DASH MXL Dash Configurable Alarm LEDs 1-2-3 Gear Flashes Configurable Alarm LEDs 4-5-6 Remotable Pushbuttons CAN - Power Connection Diplay Menu Pushbutton 06 Scroll Pushbutton Mem Pushbutton View Pushbutton 07
CHAPTER 1 INSTALLATION AND CONNECTION MXL DASH MXL DASH How To install and connect MXL Dash to EVO4. 2 1 MXL Dash has to be connected via CAN bus to your EVO4, whose firmware version should be 43.03.17 or following. Connection is via CAN cable, that you find in the kit: just plug the connector into the “EXP” EVO4 port. CAN - Power Connection ECU - CAN RS232 Beacon Exp.
CHAPTER 1 3 INSTALLATION AND CONNECTION MXL DASH MXL DASH 4 Please, check the firmware version of your EVO4: connect it to PC via USB cable, run the program AiM RaceStudio2 and press “Device Info” pushbutton. (1) If the firmware is not adequate: Enter into www.aim-sportline.com Enter into “Download Area Section” Select “Firmware” Download EVO4 Firmup to your PC. (2) 1 Finally, run it and at the end of operations, check that everything is correct.
CHAPTER 2 CONFIGURATION OF MXL DASH MXL DASH How to configure MXL Dash. 1 MXL Dash receives its configuration parameters from EVO4. So, you are supposed to configure EVO4 in order to make MXL Dash properly working. Select, therefore, in EVO4 configuration, MXL Dash as a display. 3 2 You will see the MXL Dash image appearing. and you have to define: The RPM thresholds to activate the Flash Gear LEDs. The channels displayed in the two pages of the dash. The related short names to be displayed.
CHAPTER 3 BUTTONS AND FIELDS MXL DASH Buttons and fields in MXL Dash. When you turn MXL Dash on, the bottom row shows a message about the status of the satellites: 1 Using the “MENU” key you enter into the local configuration menu, it is possible: n Night Vision On/Off Turn the back light On/Off. n Set Time: 24H / 12H Determine whether the current time is shown in European format (00:24) and American (12:12 am 0:12 pm) Press “OK” to change the time format.
CHAPTER 3 MXL DASH BUTTONS AND FIELDS The View and Mem Buttons.
CHAPTER 4 MXL DASH DATA SHEET MXL DASH MXL Dash n Aluminum body n Grey back light n 6 alarm LEDs n 10 configurable gear flashes n Dimensions: 179 x 91 x 26 mm n Weight: 500g n 4 Pins female connector (external view) Our web site aim-sportline.com is constantly updated. 1 2 3 4 VIEW GND >> MENU/<< n 5 Pins female connector (external view) 1 2 3 4 5 18 We try to share with you our experiences about our products and how to use them in the tracks all over the world.
