User Manual

LCU ONE-CAN+Analog
User manual
Release 1.05
www.aim-sportline.com
22
Under the table is “Multiplier to calculate AFR from lambda” field. It allows to both
change used fuel and insert a new one.
Select the used fuel to show AFR.
In case used fuel is not included in the database and only in case its Stoichiometric
value is known press “Add custom value” button and the figure below appears.
Insert the new value and the related legend. Press “Add new item to list” button and
then “Save” button.
Likewise, selecting a multiplier from the left box labelled “Custom multiplier list” and
pressing “Remove selected item from list” button the multiplier is removed.
The remaining part of the layer refers to the configuration of LCU-ONE analog part.
This part of Race Studio 2 works like Lambda Configurator. Refer to the related
paragraph for the analog configuration.