User guide

GPS05 Module

User manual

Release 1.01

4.5 – MyChron4: Data visualisation

When GPS05 Module is connected to MyChron4, switching the logger on GPS05

Module recognition window appears.

• MyChron4, eBox Gold and

GPS Firmware versions

• EU = European version; USA =

American Version

4.5.1 – Data visualisation while recording

Pressing “ON/VIEW” button, MyChron4 display shows, under the RPM bar graph,

GPS speed value with the related unit of measure (kmh/mph). Pressing again

“ON/VIEW” button the following window appears:

• Number of received satellites

• GPS Status:

o SEARCH=searching for

satellites

o BAD=reception is bad;

o WEAK=signal is weak;

o GOOD=reception is ok

• GPS Speed

To come back to the first page, click twice “ON/VIEW” button.

4.5.2 – Data visualization during data recall

The logger shows some additional information (please refer to MyChron4 user

manual for further information):

“Session summary” page shows max

GPS speed peak of the test.

“Splits of selected lap” page shows max

and min peaks of GPS speed of the lap.

4.6 – MyChron4 Data key for data download

Software, Data key working mode and data download are the same of MyChron4.

Please refer to MyChron4 user manual for further information.