SDS

AIM
TM
Cavity Protection Toothpaste
Safety Data Sheet
According To Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules And Regulations
05/11/2015
EN (English US)
5/11
Exposure Controls
Appropriate Engineering Controls: For occupational/workplace settings: Local exhaust and general ventilation must be adequate to
meet exposure standards. Site-specific risk assessments should be conducted to determine the appropriate exposure control
measures. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels
below recommended exposure limits. Emergency eye wash fountains and safety showers should be available in the immediate
vicinity of any potential exposure.
Personal Protective Equipment: For occupational/workplace settings and bulk quantities: Gloves. Protective goggles. Protective
clothing.
Materials for Protective Clothing: For occupational/workplace settings: Chemically resistant materials and fabrics.
Hand Protection: For occupational/workplace settings: Wear chemically resistant protective gloves.
Eye Protection: For occupational/workplace settings: Chemical safety goggles.
Skin and Body Protection: For occupational/workplace settings: Wash contaminated clothing before reuse.
Respiratory Protection: If exposure limits are exceeded or irritation is experienced, approved respiratory protection should be worn.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Information on Basic Physical and Chemical Properties
Physical State
:
Solid
Appearance
:
Gel
Odor
:
Mint odor
Odor Threshold
:
Not available
pH
:
Not available
Evaporation Rate
:
Not available
Melting Point
:
Not available
Freezing Point
:
Not available
Boiling Point
:
Not available
Flash Point
:
Not available
Auto-ignition Temperature
:
Not available
Decomposition Temperature
:
Not available
Flammability (solid, gas)
:
Not available
Lower Flammable Limit
:
Not available
Upper Flammable Limit
:
Not available
Vapor Pressure
:
Not available
Relative Vapor Density at 20 °C
:
Not available
Specific Gravity
:
Not available
Solubility
:
Not available
Partition Coefficient: N-Octanol/Water
:
Not available
Viscosity
:
Not available
Explosion Data – Sensitivity to Mechanical Impact
:
Not expected to present an explosion hazard due to mechanical impact.
Explosion Data – Sensitivity to Static Discharge
:
Not expected to present an explosion hazard due to static discharge.
SECTION 10: STABILITY AND REACTIVITY
Reactivity: Hazardous reactions will not occur under normal conditions.
Chemical Stability: The product is stable at normal handling and storage conditions.
Possibility of Hazardous Reactions: Hazardous polymerization will not occur.
Conditions to Avoid: None known.
Incompatible Materials: Strong oxidizers. Reducing agents.
Hazardous Decomposition Products: None known.