Instructions

Binary phase shift keying (BPSK)
73 TGF4000 Series Instruction Manual
Hop polarity
To set which level of the switching signal will output the hop phase press the HopPol soft-key.
The currently selected polarity will appear in the Edit Box.
The options are Positive or Negative.
Setting Positive will cause BSPK to generate the hop phase while the switching signal is high
and the carrier phase while the switching signal is low.
Setting Negative will cause BPSK to generate the hop phase while the switching signal is low
and the carrier phase while the switching signal is high.
All the parameters for binary phase shift keying are now set.