Instructions

Modulation commands
169 TGF4000 Series Instruction Manual
· MODPWMSRC <CPD> Set PWM waveform source to <INT> or <EXT>
· MODSUMSRC <CPD> Set SUM waveform source to <INT> or <EXT>
· MODAMFREQ <NRF> Set AM waveform frequency to <NRF> Hz
· MODFMFREQ <NRF> Set FM waveform frequency to <NRF> Hz
· MODPMFREQ <NRF> Set PM waveform frequency to <NRF> Hz
· MODPWMFREQ <NRF> Set PWM waveform frequency to <NRF> Hz
· MODSUMFREQ <NRF> Set SUM waveform frequency to <NRF> Hz
· MODAMDEPTH <NRF> Set AM waveform depth to <NRF> %
· MODFMDEV <NRF> Set FM waveform deviation to <NRF> Hz
· MODPMDEV <NRF> Set PM waveform deviation to <NRF> degree
· MODPWMDEV <NRF> Set PWM waveform deviation to <NRF> %
· MODSUMLEVEL <NRF> Set SUM waveform level to <NRF> %
· MODFSKSRC <CPD> Set FSK waveform source to <INT> or <EXT>
· MODHOPFREQ <NRF> Set HOP frequency to <NRF> Hz
· MODFSKRATE <NRF> Set FSK rate to <NRF> Hz
· MODPOLFSK <CPD> Set FSK slope to <POS> or <NEG>
· MODBPSKSRC <CPD> Set BPSK waveform source to <INT> or <EXT>
· MODBPSKPHASE <NRF> Set BPSK phase offset to <NRF> degree
· MODBPSKRATE <NRF> Set BPSK rate to <NRF> Hz
· MODPOLBPSK <CPD> Set BPSK slope to <POS> or <NEG>
· MODASKSRC <CPD> Set ASK waveform source to <INT> or <EXT>
· MODHOPAMPL <NRF> Set HOP amplitude to <NRF> Vpp
· MODASKRATE <NRF> Set ASK rate to <NRF> Hz
· MODPOLASK <CPD> Set ASK slope to <POS> or <NEG>